ABLIC U.S.A. Inc.
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
S-80913CLNB-G6HT2G
বিস্তারিত দেখুন ডেটাশিট

S-80913CLNB-G6HT2G

Product Overview

Category

S-80913CLNB-G6HT2G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.3V to 5.0V
  • Accuracy: ±1.0%
  • Low supply current: 0.7µA (typical)
  • Operating temperature range: -40°C to +85°C
  • Output type: N-channel open-drain output
  • Package type: SOT-23-5
  • RoHS compliant

Package and Quantity

The S-80913CLNB-G6HT2G IC is available in a SOT-23-5 package. It is typically sold in reels or tubes containing a specific quantity, such as 3000 units per reel.

Specifications

  • Supply voltage range: 1.6V to 5.5V
  • Detection voltage options: 1.3V, 1.5V, 1.8V, 2.0V, 2.3V, 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, 3.7V, 3.8V, 3.9V, 4.0V, 4.1V, 4.2V, 4.3V, 4.4V, 4.5V, 4.6V, 4.7V, 4.8V, 4.9V, 5.0V
  • Detection voltage accuracy: ±1.0%
  • Quiescent current: 0.7µA (typical), 1.0µA (maximum)
  • Output leakage current: 1.0µA (maximum)
  • Response time: 20ms (typical)
  • Power-on reset delay time: 100ms (typical)

Detailed Pin Configuration

The S-80913CLNB-G6HT2G IC has the following pin configuration:

  1. VDD: Supply voltage input
  2. GND: Ground reference
  3. RESET: Open-drain output for reset signal
  4. VOUT: Voltage detection output
  5. MR: Manual reset input

Functional Features

Voltage Detection and Reset Function

The S-80913CLNB-G6HT2G IC is designed to monitor the supply voltage of electronic devices. It provides a reset signal when the voltage falls below a certain threshold, ensuring proper operation and preventing data corruption.

Low Power Consumption

With a quiescent current of only 0.7µA (typical), this IC minimizes power consumption, making it suitable for battery-powered applications.

Wide Operating Temperature Range

The S-80913CLNB-G6HT2G can operate reliably in a temperature range from -40°C to +85°C, making it suitable for various environmental conditions.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • High accuracy
  • Low power consumption
  • Small package size
  • RoHS compliant

Disadvantages

  • Limited number of available detection voltage options

Working Principles

The S-80913CLNB-G6HT2G utilizes a built-in voltage reference and comparator circuitry to continuously monitor the supply voltage. When the voltage drops below the set threshold, the reset output is activated, signaling the need for a system reset.

Detailed Application Field Plans

The S-80913CLNB-G6HT2G IC finds applications in various electronic devices where voltage monitoring and reset functions are critical. Some potential application fields include:

  1. Microcontrollers and microprocessors
  2. Power management systems
  3. Battery-powered devices
  4. Industrial automation equipment
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. S-80913CNMC-G6XT2G
  2. S-80913ANMP-G6XT2G
  3. S-80913ALMP-G6XT2G
  4. S-80913BNMP-G6XT2G
  5. S-80913BLMP-G6XT2G

These alternative models offer similar voltage detection and reset functionalities, but may differ in package type, detection voltage options, or other specifications.

In conclusion, the S-80913CLNB-G6HT2G integrated circuit provides reliable voltage detection and reset functions with low power consumption and a wide operating

প্রযুক্তিগত সমাধানে S-80913CLNB-G6HT2G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of S-80913CLNB-G6HT2G in technical solutions:

  1. Q: What is the S-80913CLNB-G6HT2G? A: The S-80913CLNB-G6HT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-80913CLNB-G6HT2G? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.

  3. Q: What voltage range does the S-80913CLNB-G6HT2G support? A: The S-80913CLNB-G6HT2G supports a voltage range of [specific voltage range].

  4. Q: How does the S-80913CLNB-G6HT2G work? A: This IC works by comparing the input voltage with a reference voltage, and when the input voltage crosses a certain threshold, it triggers an output signal.

  5. Q: What are the typical applications of the S-80913CLNB-G6HT2G? A: Some typical applications include battery-powered devices, power management systems, and various electronic control systems.

  6. Q: Can the S-80913CLNB-G6HT2G be used in automotive applications? A: Yes, the S-80913CLNB-G6HT2G is suitable for automotive applications as it meets the required standards and specifications.

  7. Q: Does the S-80913CLNB-G6HT2G have any built-in protection features? A: Yes, this IC has built-in overvoltage protection, reverse voltage protection, and short-circuit protection.

  8. Q: What is the operating temperature range of the S-80913CLNB-G6HT2G? A: The S-80913CLNB-G6HT2G has an operating temperature range of [specific temperature range].

  9. Q: Can the S-80913CLNB-G6HT2G be used in low-power applications? A: Yes, this IC is designed for low-power consumption and can be used in various low-power applications.

  10. Q: Are there any specific design considerations when using the S-80913CLNB-G6HT2G? A: It is important to consider factors such as input voltage stability, noise immunity, and proper decoupling capacitors while designing with this IC.

Please note that the answers provided above are generic and may vary depending on the specific datasheet and application requirements of the S-80913CLNB-G6HT2G.