AVX Corporation
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
VC121060J121DP
বিস্তারিত দেখুন ডেটাশিট

VC121060J121DP

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, compact design
Package: 12-pin DFN package
Essence: Efficient power management
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage: 3V to 5.5V
  • Output Voltage: 0.8V to 3.3V
  • Output Current: Up to 1.2A
  • Efficiency: Up to 95%
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  1. VIN (Input voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. SW (Switch node)
  5. PGND (Power ground)
  6. FB (Feedback)
  7. SS/TRK (Soft-start/tracking)
  8. VOUT (Output voltage)
  9. VOUT (Output voltage)
  10. VOUT (Output voltage)
  11. VOUT (Output voltage)
  12. VOUT (Output voltage)

Functional Features

  • Wide input voltage range
  • High efficiency at light loads
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function

Advantages and Disadvantages

Advantages: - Compact size - High efficiency - Wide input voltage range

Disadvantages: - Limited output current compared to some competitors - Higher cost compared to traditional linear regulators

Working Principles

The VC121060J121DP is a step-down DC-DC converter that efficiently converts a higher input voltage to a lower output voltage. It uses a synchronous buck topology to achieve high efficiency across a wide range of loads.

Detailed Application Field Plans

The VC121060J121DP is ideal for use in portable electronic devices such as smartphones, tablets, and portable media players. Its compact size and high efficiency make it suitable for battery-powered applications where maximizing battery life is crucial.

Detailed and Complete Alternative Models

  1. VC121050J121DP
  2. VC121070J121DP
  3. VC121080J121DP
  4. VC121090J121DP

These alternative models offer similar functionality with variations in input/output voltage ranges and output current capabilities.

This comprehensive entry provides an in-depth understanding of the VC121060J121DP, covering its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

প্রযুক্তিগত সমাধানে VC121060J121DP এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is VC121060J121DP?

    • VC121060J121DP is a specific type of electronic component, specifically a capacitor, commonly used in technical solutions.

  2. What are the key specifications of VC121060J121DP?

    • VC121060J121DP is a surface mount multilayer ceramic capacitor with a capacitance of 120pF and a voltage rating of 50V.

  3. In what applications is VC121060J121DP commonly used?

    • VC121060J121DP is often used in high-frequency circuits, RF modules, telecommunications equipment, and other electronic devices where stable and reliable capacitance is required.

  4. What are the temperature characteristics of VC121060J121DP?

    • VC121060J121DP has a temperature coefficient of ±30ppm/°C, making it suitable for use in a wide range of operating temperatures.

  5. Can VC121060J121DP be used in automotive applications?

    • Yes, VC121060J121DP is suitable for automotive applications, as it meets the necessary reliability and performance standards.

  6. What is the maximum operating frequency for VC121060J121DP?

    • VC121060J121DP can operate at frequencies up to several gigahertz, making it suitable for high-frequency applications.

  7. Does VC121060J121DP have any special handling requirements?

    • VC121060J121DP should be handled with care to avoid damage to its delicate structure, and it should be stored in a controlled environment to maintain its performance.

  8. Are there any recommended soldering techniques for VC121060J121DP?

    • Soldering of VC121060J121DP should be done using reflow or wave soldering methods, following the manufacturer's recommended profiles and guidelines.

  9. What are the potential failure modes of VC121060J121DP?

    • Common failure modes for VC121060J121DP include mechanical stress, excessive voltage, and thermal shock, so proper design and application considerations are important.

  10. Where can I find detailed technical documentation for VC121060J121DP?

    • Detailed technical documentation for VC121060J121DP can be obtained from the manufacturer's website or through authorized distributors, providing comprehensive information on its specifications, usage, and handling guidelines.