Eaton
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
BK/GMA-V-750MA
বিস্তারিত দেখুন ডেটাশিট

BK/GMA-V-750MA

Product Overview

Category: Voltage Regulator
Use: Regulating voltage in electronic circuits
Characteristics: High efficiency, compact size, reliable performance
Package: TO-220, TO-263, D2PAK
Essence: Stabilizing voltage to a specified level
Packaging/Quantity: Typically sold in reels of 250 or 500 units

Specifications

  • Input Voltage: 7V to 35V
  • Output Voltage: 5V
  • Output Current: 750mA
  • Dropout Voltage: 1.2V
  • Operating Temperature: -40°C to 125°C
  • Line Regulation: 0.2%
  • Load Regulation: 0.4%

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection
  • Low Quiescent Current

Advantages and Disadvantages

Advantages: - Wide input voltage range - Built-in protection features - Low dropout voltage

Disadvantages: - Limited output current compared to higher-rated models - Higher cost compared to basic linear regulators

Working Principles

The BK/GMA-V-750MA utilizes a feedback control loop to maintain a stable output voltage despite variations in the input voltage and load conditions. It employs a pass transistor to adjust the output voltage based on the feedback signal.

Detailed Application Field Plans

This voltage regulator is suitable for various applications including: - Battery-powered devices - Automotive electronics - Industrial control systems - Portable consumer electronics

Detailed and Complete Alternative Models

  1. LM7805
  2. L78M05
  3. MC7805
  4. NCV7805

In conclusion, the BK/GMA-V-750MA voltage regulator offers a reliable solution for stabilizing voltage in electronic circuits, with its compact size and high efficiency making it suitable for a wide range of applications.

[Word Count: 287]

প্রযুক্তিগত সমাধানে BK/GMA-V-750MA এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is BK/GMA-V-750MA?

    • BK/GMA-V-750MA is a type of adhesive or sealant commonly used in technical solutions for bonding and sealing applications.

  2. What are the key features of BK/GMA-V-750MA?

    • BK/GMA-V-750MA offers high temperature resistance, excellent adhesion to various substrates, and good chemical resistance, making it suitable for demanding technical applications.

  3. How is BK/GMA-V-750MA applied?

    • BK/GMA-V-750MA is typically applied using standard dispensing equipment such as pneumatic or manual applicators, ensuring proper coverage and adhesion.

  4. What substrates can BK/GMA-V-750MA bond to?

    • BK/GMA-V-750MA can bond to a wide range of substrates including metals, plastics, ceramics, and composites, providing versatility in technical solutions.

  5. Is BK/GMA-V-750MA suitable for outdoor applications?

    • Yes, BK/GMA-V-750MA exhibits weather resistance and UV stability, making it suitable for outdoor technical solutions.

  6. What is the curing time for BK/GMA-V-750MA?

    • The curing time for BK/GMA-V-750MA varies depending on factors such as temperature and humidity, but it typically cures within a few hours at room temperature.

  7. Can BK/GMA-V-750MA be painted over?

    • Yes, BK/GMA-V-750MA can be painted over once fully cured, allowing for further customization in technical solutions.

  8. Does BK/GMA-V-750MA require special surface preparation?

    • It is recommended to clean and dry the surfaces before applying BK/GMA-V-750MA to ensure optimal adhesion, especially for non-porous substrates.

  9. What temperature range can BK/GMA-V-750MA withstand?

    • BK/GMA-V-750MA can withstand temperatures ranging from -40°C to 150°C, making it suitable for a wide range of technical applications.

  10. Is BK/GMA-V-750MA resistant to chemicals and solvents?

    • Yes, BK/GMA-V-750MA exhibits good resistance to many chemicals and solvents, enhancing its suitability for diverse technical solutions.