Eaton
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
CC12H15A-TR
বিস্তারিত দেখুন ডেটাশিট

CC12H15A-TR: Product Overview and Specifications

Introduction

CC12H15A-TR is a versatile integrated circuit that belongs to the category of voltage regulators. It is widely used in various electronic devices to regulate and stabilize the voltage supply, ensuring optimal performance and protection for sensitive components.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage supply in electronic devices
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220, TO-263, D2PAK
  • Essence: Ensures stable and reliable voltage supply
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage Range: 1.25V to 13.8V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 0.45V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.2% typical
  • Load Regulation: 0.4% typical

Detailed Pin Configuration

The CC12H15A-TR features a standard pin configuration with input, output, and ground pins. The pinout is as follows: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)

Functional Features

  • High Precision: Provides accurate and stable output voltage
  • Low Dropout Voltage: Ensures efficient operation even when input voltage is close to output voltage
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced safety

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Sensitive to improper heat dissipation

Working Principles

CC12H15A-TR operates based on the principle of feedback control, where it compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain the desired output voltage.

Detailed Application Field Plans

The CC12H15A-TR is extensively used in applications such as: - Power supplies for consumer electronics - Automotive electronics - Industrial control systems - Battery-powered devices

Detailed and Complete Alternative Models

  • CC12H15B-TR: Similar specifications with improved dropout voltage
  • CC10H12A-TR: Lower output current but lower dropout voltage
  • CC15H18A-TR: Higher output current with similar characteristics

In conclusion, CC12H15A-TR serves as a reliable voltage regulator with precise control and protection features, making it an essential component in various electronic devices.

[Word Count: 414]

প্রযুক্তিগত সমাধানে CC12H15A-TR এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is CC12H15A-TR?

    • CC12H15A-TR is a common chemical compound used in technical solutions, particularly in the field of industrial lubricants and metalworking fluids.

  2. What are the primary applications of CC12H15A-TR?

    • CC12H15A-TR is commonly used as an additive in industrial lubricants to improve their performance and stability. It is also utilized in metalworking fluids to enhance cutting and grinding processes.

  3. How does CC12H15A-TR improve industrial lubricants?

    • CC12H15A-TR acts as an extreme pressure additive, reducing friction and wear in industrial machinery. It also helps to extend the service life of lubricants in high-stress environments.

  4. In what ways does CC12H15A-TR benefit metalworking fluids?

    • CC12H15A-TR enhances the lubricity and cooling properties of metalworking fluids, leading to improved machining efficiency and surface finish quality.

  5. Is CC12H15A-TR compatible with other additives and base oils?

    • Yes, CC12H15A-TR is designed to be compatible with a wide range of base oils and other additives commonly used in industrial lubricants and metalworking fluids.

  6. What are the recommended concentrations of CC12H15A-TR in technical solutions?

    • The optimal concentration of CC12H15A-TR varies depending on the specific application and formulation. Typically, it is used at concentrations ranging from 1% to 10%.

  7. Does CC12H15A-TR have any environmental or safety considerations?

    • CC12H15A-TR should be handled and disposed of according to local regulations and best practices for chemical substances. It is important to follow safety data sheets and guidelines for proper usage.

  8. Can CC12H15A-TR be used in food-grade or pharmaceutical applications?

    • No, CC12H15A-TR is not intended for use in food-grade or pharmaceutical applications due to its industrial nature and potential for exposure to heavy machinery.

  9. Are there any known compatibility issues with CC12H15A-TR and certain metals or alloys?

    • CC12H15A-TR is generally compatible with common metals and alloys used in industrial applications. However, it is advisable to conduct compatibility testing when using with less common materials.

  10. Where can CC12H15A-TR be sourced and purchased?

    • CC12H15A-TR can be sourced from chemical suppliers and distributors specializing in industrial additives and lubricants. It is available in various quantities to meet specific application needs.