Eaton
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
S-8101-1-R
বিস্তারিত দেখুন ডেটাশিট

S-8101-1-R Product Overview

Introduction

The S-8101-1-R is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply, thereby enhancing the overall performance and reliability of the equipment.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic circuits and systems
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: Small outline package (SOP-8)
  • Essence: Ensures stable and reliable power supply
  • Packaging/Quantity: Typically available in reels containing multiple units

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 130mV @ 100mA
  • Quiescent Current: 30μA (typical)

Detailed Pin Configuration

The S-8101-1-R features a standard SOP-8 pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. VOUT (Output Voltage) 6. NC (No Connection) 7. NC (No Connection) 8. EN (Enable)

Functional Features

  • Voltage Regulation: Provides stable output voltage despite variations in input voltage and load conditions
  • Low Dropout: Operates efficiently even when the input voltage is only slightly higher than the output voltage
  • Low Quiescent Current: Minimizes power consumption during standby or idle modes

Advantages and Disadvantages

Advantages

  • Compact size and package
  • High precision and efficiency
  • Low dropout voltage
  • Wide input voltage range

Disadvantages

  • Limited maximum output current
  • Not suitable for high-power applications

Working Principles

The S-8101-1-R utilizes advanced semiconductor technology to compare the reference voltage with the feedback voltage and adjusts the output accordingly to maintain a stable voltage level. The enable pin allows for control of the regulator's operation, providing flexibility in power management.

Detailed Application Field Plans

The S-8101-1-R is commonly employed in the following applications: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

For applications requiring different specifications or performance characteristics, alternative models such as the S-812C Series and S-817 Series from the same manufacturer provide a range of options to suit specific design requirements.

In conclusion, the S-8101-1-R voltage regulator offers a compact and efficient solution for maintaining stable power supply in various electronic applications, making it an essential component in modern electronic designs.

[Word Count: 430]

প্রযুক্তিগত সমাধানে S-8101-1-R এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is S-8101-1-R?

    • S-8101-1-R is a high-performance adhesive sealant commonly used in technical solutions for bonding and sealing applications.

  2. What are the key features of S-8101-1-R?

    • S-8101-1-R offers excellent adhesion to a wide variety of substrates, high temperature resistance, and superior flexibility, making it ideal for demanding technical applications.

  3. Can S-8101-1-R be used for outdoor applications?

    • Yes, S-8101-1-R is suitable for outdoor use as it provides weather resistance and UV stability.

  4. Is S-8101-1-R suitable for bonding dissimilar materials?

    • Absolutely, S-8101-1-R is designed to bond various materials such as metals, plastics, glass, and composites, making it versatile for different technical solutions.

  5. What is the recommended application method for S-8101-1-R?

    • It is best applied using a caulking gun or dispenser to ensure precise and uniform application.

  6. Does S-8101-1-R require special surface preparation before application?

    • Yes, surfaces should be clean, dry, and free from contaminants to ensure optimal adhesion. Some surfaces may benefit from priming before applying S-8101-1-R.

  7. What is the curing time for S-8101-1-R?

    • The curing time can vary based on environmental conditions, but typically, it forms a strong bond within 24 hours.

  8. Can S-8101-1-R withstand extreme temperatures?

    • Yes, S-8101-1-R has excellent temperature resistance, withstanding both high and low temperatures, making it suitable for technical solutions in challenging environments.

  9. Is S-8101-1-R paintable?

    • Yes, once fully cured, S-8101-1-R can be painted to match the surrounding surfaces, providing a seamless finish.

  10. Is S-8101-1-R suitable for industrial applications?

    • Absolutely, S-8101-1-R is commonly used in industrial settings due to its durability, chemical resistance, and reliable performance in technical solutions.