Exar Corporation
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
ST16C2450IQ48-F
বিস্তারিত দেখুন ডেটাশিট

ST16C2450IQ48-F

Product Overview

Category

The ST16C2450IQ48-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial communication applications.

Characteristics

  • High-speed data transfer capability
  • Low power consumption
  • Compact size
  • Reliable performance

Package

The ST16C2450IQ48-F is available in a 48-pin quad flat package (QFP).

Essence

This IC serves as a bridge between parallel and serial communication interfaces, enabling efficient data transfer between devices.

Packaging/Quantity

The ST16C2450IQ48-F is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Data Transfer Rate: Up to 1 Mbps
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 2
  • Interface Type: UART (Universal Asynchronous Receiver Transmitter)
  • Package Type: QFP
  • Pin Count: 48

Detailed Pin Configuration

The ST16C2450IQ48-F has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

(Pin diagram goes here)

Functional Features

  • Dual-channel UART functionality
  • Support for various baud rates
  • Programmable control registers
  • Interrupt capability for efficient data handling
  • Auto-flow control for seamless data transmission

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Low power consumption
  • Compact size for space-constrained applications
  • Reliable performance even in harsh environments

Disadvantages

  • Limited number of channels (2)
  • Requires external components for complete system integration

Working Principles

The ST16C2450IQ48-F operates based on the principles of UART communication. It receives parallel data from a device, converts it into serial format, and transmits it to another device through a serial interface. Similarly, it can receive serial data, convert it into parallel format, and send it to the receiving device.

Detailed Application Field Plans

The ST16C2450IQ48-F finds applications in various fields, including:

  1. Industrial Automation: Used for communication between PLCs (Programmable Logic Controllers) and other industrial devices.
  2. Telecommunications: Enables data transfer between modems, routers, and other network equipment.
  3. Consumer Electronics: Facilitates communication between microcontrollers and peripheral devices such as displays, sensors, and memory modules.
  4. Automotive: Used in automotive electronics for communication between different control units within a vehicle.

Detailed and Complete Alternative Models

  1. ST16C2450IQ64-F: Similar to ST16C2450IQ48-F but with 64-pin QFP package.
  2. ST16C2450IP48-F: Same functionality as ST16C2450IQ48-F but with 48-pin plastic DIP package.
  3. ST16C2450IP64-F: Similar to ST16C2450IQ64-F but with 64-pin plastic DIP package.

(Note: The above alternative models are just examples and not an exhaustive list.)

In conclusion, the ST16C2450IQ48-F is a versatile integrated circuit that enables efficient serial communication. With its high-speed data transfer capability, low power consumption, and compact size, it is widely used in various industries for reliable and seamless data transmission.

প্রযুক্তিগত সমাধানে ST16C2450IQ48-F এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of ST16C2450IQ48-F in technical solutions:

  1. Q: What is the ST16C2450IQ48-F? A: The ST16C2450IQ48-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

  2. Q: What are the key features of the ST16C2450IQ48-F? A: The key features of the ST16C2450IQ48-F include high-speed data transfer rates, multiple UART channels, FIFO buffers, programmable baud rates, and compatibility with various microcontrollers.

  3. Q: How many UART channels does the ST16C2450IQ48-F support? A: The ST16C2450IQ48-F supports up to four independent UART channels, allowing for simultaneous communication with multiple devices.

  4. Q: What is the maximum data transfer rate supported by the ST16C2450IQ48-F? A: The ST16C2450IQ48-F supports high-speed data transfer rates up to 5 Mbps, making it suitable for applications requiring fast serial communication.

  5. Q: Can the ST16C2450IQ48-F be used with different microcontrollers? A: Yes, the ST16C2450IQ48-F is compatible with a wide range of microcontrollers, making it versatile for integration into various technical solutions.

  6. Q: Does the ST16C2450IQ48-F have built-in FIFO buffers? A: Yes, the ST16C2450IQ48-F has 16-byte transmit and receive FIFO buffers per UART channel, which help in reducing CPU overhead and improving performance.

  7. Q: Can I program the baud rate of the ST16C2450IQ48-F? A: Yes, the ST16C2450IQ48-F allows for programmable baud rates, providing flexibility in configuring the serial communication speed according to the application requirements.

  8. Q: What voltage levels does the ST16C2450IQ48-F support? A: The ST16C2450IQ48-F supports both 3.3V and 5V voltage levels, making it compatible with a wide range of systems and devices.

  9. Q: Is the ST16C2450IQ48-F suitable for industrial applications? A: Yes, the ST16C2450IQ48-F is designed to meet the requirements of industrial applications, offering robustness, reliability, and extended temperature range.

  10. Q: Where can I find more information about the ST16C2450IQ48-F? A: You can find more detailed information about the ST16C2450IQ48-F, including datasheets, application notes, and technical documentation on the manufacturer's website or by contacting their customer support.