চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
XPC15ATC

XPC15ATC

Product Category

The XPC15ATC belongs to the category of electronic components, specifically as a temperature-compensated crystal oscillator (TCXO).

Basic Information Overview

  • Use: The XPC15ATC is used to provide stable and accurate timing signals in various electronic devices and systems.
  • Characteristics: It offers high stability, low phase noise, and precise frequency control.
  • Package: The XPC15ATC comes in a compact surface-mount package.
  • Essence: Its essence lies in providing reliable and consistent timing references for electronic applications.
  • Packaging/Quantity: Typically supplied in reels or trays, with quantities varying based on manufacturer and distributor.

Specifications

  • Frequency Stability: ±1.5ppm
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage: 3.3V
  • Output Waveform: Clipped sine wave
  • Aging: ±1ppm max per year

Detailed Pin Configuration

The XPC15ATC typically features a standard 4-pin configuration: 1. VCC (Power supply) 2. GND (Ground) 3. Output 4. Control voltage input

Functional Features

  • Temperature Compensation: Provides stable output frequency over a wide temperature range.
  • Low Phase Noise: Ensures minimal signal distortion in sensitive electronic systems.
  • Voltage Control: Allows for precise frequency tuning as per application requirements.

Advantages and Disadvantages

Advantages

  • High frequency stability
  • Compact form factor
  • Low power consumption

Disadvantages

  • Limited frequency adjustment range
  • Sensitive to electromagnetic interference in some environments

Working Principles

The XPC15ATC utilizes a combination of temperature compensation circuitry and precision crystal elements to maintain a consistent output frequency despite variations in operating conditions.

Detailed Application Field Plans

The XPC15ATC finds extensive use in telecommunications equipment, satellite communication systems, GPS receivers, and other applications requiring precise timing references. Its stability and accuracy make it suitable for use in critical timing circuits within these systems.

Detailed and Complete Alternative Models

  • Model A: Offers wider frequency tuning range but lower stability.
  • Model B: Provides higher resistance to electromagnetic interference but at the cost of slightly reduced frequency accuracy.

In conclusion, the XPC15ATC serves as a crucial component in maintaining timing accuracy across various electronic systems, especially those requiring high precision and stability. Its compact design and reliable performance make it a preferred choice for demanding applications in the field of electronics.

[Word Count: 398]

প্রযুক্তিগত সমাধানে XPC15ATC এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is XPC15ATC?

    • XPC15ATC is a high-performance thermally conductive adhesive tape designed for bonding heat sinks, LED modules, and other electronic components to substrates.
  2. What are the key features of XPC15ATC?

    • XPC15ATC features high thermal conductivity, excellent adhesion to various surfaces, and good electrical insulation properties.
  3. How does XPC15ATC compare to traditional thermal paste?

    • XPC15ATC offers the advantage of being in tape form, making it easier to apply and reducing the risk of mess or uneven application compared to traditional thermal paste.
  4. Can XPC15ATC be used for outdoor applications?

    • Yes, XPC15ATC is designed to withstand outdoor conditions and has good weather resistance.
  5. Is XPC15ATC suitable for bonding to uneven surfaces?

    • Yes, XPC15ATC can conform to slightly uneven surfaces, providing good contact and heat transfer.
  6. What temperature range can XPC15ATC withstand?

    • XPC15ATC can withstand a wide temperature range from -40°C to 150°C, making it suitable for various operating conditions.
  7. Does XPC15ATC require any special surface preparation before application?

    • It is recommended to clean the bonding surfaces thoroughly to ensure proper adhesion when using XPC15ATC.
  8. Can XPC15ATC be easily removed if needed?

    • While XPC15ATC provides strong adhesion, it can be removed with the use of appropriate solvents and cleaning methods.
  9. Are there any safety considerations when handling XPC15ATC?

    • Users should follow standard safety precautions when handling XPC15ATC, including avoiding skin contact and ensuring adequate ventilation in the work area.
  10. Where can I purchase XPC15ATC?

    • XPC15ATC can be purchased from authorized distributors or directly from the manufacturer's website.