IDT, Integrated Device Technology Inc
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
8N4SV76EC-0103CDI8
বিস্তারিত দেখুন ডেটাশিট

8N4SV76EC-0103CDI8

Product Overview

Category

The 8N4SV76EC-0103CDI8 belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • High performance
  • Compact size
  • Reliable operation
  • Wide operating temperature range

Package

The 8N4SV76EC-0103CDI8 comes in a small surface mount package, which allows for easy integration into circuit boards.

Essence

The essence of this product lies in its ability to provide precise and stable electrical signals in electronic systems.

Packaging/Quantity

Each package contains 100 units of the 8N4SV76EC-0103CDI8.

Specifications

  • Model: 8N4SV76EC-0103CDI8
  • Operating Voltage: 3.3V
  • Frequency Range: 10MHz - 100MHz
  • Output Type: Square wave
  • Temperature Range: -40°C to +85°C
  • Dimensions: 5mm x 5mm x 1mm

Detailed Pin Configuration

The 8N4SV76EC-0103CDI8 has the following pin configuration:

  1. VCC (Power supply)
  2. GND (Ground)
  3. OUT (Output signal)

Functional Features

  • High-frequency stability
  • Low phase noise
  • Fast rise/fall times
  • Low power consumption

Advantages and Disadvantages

Advantages

  • Excellent frequency accuracy
  • Compact size for space-constrained designs
  • Wide operating temperature range

Disadvantages

  • Limited frequency range compared to some other models
  • Sensitive to electromagnetic interference

Working Principles

The 8N4SV76EC-0103CDI8 operates based on the principle of crystal oscillation. It utilizes a quartz crystal to generate precise electrical signals at the desired frequency.

Detailed Application Field Plans

The 8N4SV76EC-0103CDI8 finds applications in various fields, including:

  1. Telecommunications
  2. Consumer electronics
  3. Industrial automation
  4. Medical devices
  5. Automotive systems

Detailed and Complete Alternative Models

  1. 8N4SV76EC-0206CDI8: Similar to the 8N4SV76EC-0103CDI8 but with a higher frequency range.
  2. 8N4SV76EC-0103CDI8A: An enhanced version with improved noise performance.
  3. 8N4SV76EC-0103CDI8B: A lower-cost alternative with slightly reduced specifications.

In conclusion, the 8N4SV76EC-0103CDI8 is a high-performance electronic component that provides precise and stable electrical signals. Its compact size and wide operating temperature range make it suitable for various applications in different industries. However, it has some limitations in terms of frequency range and susceptibility to electromagnetic interference.

প্রযুক্তিগত সমাধানে 8N4SV76EC-0103CDI8 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the 8N4SV76EC-0103CDI8 and what is its application in technical solutions?
    - The 8N4SV76EC-0103CDI8 is a specific electronic component used in technical solutions, typically in electronic circuits or systems.

  2. What are the key features of the 8N4SV76EC-0103CDI8?
    - The key features of the 8N4SV76EC-0103CDI8 may include its voltage rating, current capacity, frequency range, temperature range, package type, and other specifications relevant to its application.

  3. How does the 8N4SV76EC-0103CDI8 contribute to technical solutions?
    - The 8N4SV76EC-0103CDI8 contributes to technical solutions by performing specific functions within electronic circuits or systems, such as signal amplification, filtering, voltage regulation, or timing control.

  4. Can the 8N4SV76EC-0103CDI8 be used in various technical applications?
    - Yes, the 8N4SV76EC-0103CDI8 can be used in various technical applications where its specifications and features align with the requirements of the specific application.

  5. Are there any alternative components that can be used instead of the 8N4SV76EC-0103CDI8?
    - Yes, there might be alternative components available that can perform similar functions. However, it is important to consider the compatibility and suitability of alternatives based on the specific technical solution requirements.

  6. What are the typical operating conditions for the 8N4SV76EC-0103CDI8?
    - The typical operating conditions for the 8N4SV76EC-0103CDI8 may include voltage supply range, temperature range, input/output impedance, and other relevant parameters specified in the component's datasheet.

  7. Can the 8N4SV76EC-0103CDI8 be used in high-frequency applications?
    - Yes, if the 8N4SV76EC-0103CDI8 is designed and specified for high-frequency operation, it can be used in such applications. However, it is important to verify its frequency response characteristics and suitability for the specific frequency range required.

  8. What are the potential limitations or considerations when using the 8N4SV76EC-0103CDI8?
    - Some potential limitations or considerations when using the 8N4SV76EC-0103CDI8 may include power dissipation, voltage/current limitations, noise performance, stability, and any specific requirements mentioned in the component's datasheet.

  9. Are there any recommended circuit configurations or application notes available for the 8N4SV76EC-0103CDI8?
    - It is advisable to refer to the manufacturer's documentation, including datasheets, application notes, or reference designs, for recommended circuit configurations and guidelines on using the 8N4SV76EC-0103CDI8 effectively in technical solutions.

  10. Where can I purchase the 8N4SV76EC-0103CDI8?
    - The availability of the 8N4SV76EC-0103CDI8 may vary depending on the supplier or distributor. It is recommended to check with authorized distributors, online electronics marketplaces, or directly contact the manufacturer for purchasing information.