Infineon Technologies
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
BCR116E6433HTMA1
বিস্তারিত দেখুন ডেটাশিট

BCR116E6433HTMA1

Product Category: Voltage Regulator

Basic Information Overview: - Category: Integrated Circuit - Use: Voltage regulation in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: SOT-23-5 - Essence: Regulates input voltage to a stable output voltage - Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications: - Input Voltage Range: 2.5V to 16V - Output Voltage Range: 1.2V to 15V - Dropout Voltage: 200mV at 100mA - Quiescent Current: 40µA - Load Regulation: 0.1% typical - Line Regulation: 0.03% typical

Detailed Pin Configuration: - Pin 1: Enable (EN) - Pin 2: Ground (GND) - Pin 3: Feedback (FB) - Pin 4: No Connection (NC) - Pin 5: Output (VOUT)

Functional Features: - Low dropout voltage - Low quiescent current - Thermal shutdown protection - Short-circuit current limit - Reverse battery protection

Advantages: - High precision voltage regulation - Wide input voltage range - Small package size - Low power consumption

Disadvantages: - Limited maximum output current - Sensitive to external noise

Working Principles: The BCR116E6433HTMA1 regulates the output voltage by comparing it to an internal reference voltage. It adjusts the pass transistor to maintain a stable output voltage despite changes in input voltage and load.

Detailed Application Field Plans: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models: - LM1117 - MCP1703 - AP2112

This integrated circuit, BCR116E6433HTMA1, is widely used in various electronic devices due to its high precision voltage regulation and low power consumption. Its small package size makes it suitable for compact designs in applications such as battery-powered devices, portable electronics, and IoT devices. However, designers should be mindful of its limited maximum output current and sensitivity to external noise when integrating it into their circuits.

[Word Count: 311]

প্রযুক্তিগত সমাধানে BCR116E6433HTMA1 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is BCR116E6433HTMA1?

    • BCR116E6433HTMA1 is a high-precision voltage regulator designed for use in various technical solutions.

  2. What are the key features of BCR116E6433HTMA1?

    • The key features include high accuracy, low dropout voltage, low quiescent current, and thermal shutdown protection.

  3. What are the typical applications of BCR116E6433HTMA1?

    • Typical applications include battery-powered devices, portable instruments, automotive electronics, and industrial control systems.

  4. What is the input voltage range for BCR116E6433HTMA1?

    • The input voltage range is typically between 2.5V and 18V.

  5. What is the output voltage range for BCR116E6433HTMA1?

    • The output voltage range is adjustable from 1.2V to 15V.

  6. How does BCR116E6433HTMA1 achieve high precision?

    • It utilizes a precision voltage reference and error amplifier to maintain accurate output voltage.

  7. Does BCR116E6433HTMA1 have built-in protection features?

    • Yes, it includes overcurrent protection and thermal shutdown to safeguard against potential damage.

  8. What is the typical load regulation of BCR116E6433HTMA1?

    • The load regulation is typically within ±0.5%.

  9. Can BCR116E6433HTMA1 be used in automotive applications?

    • Yes, it is suitable for automotive electronics due to its robust design and wide operating temperature range.

  10. Are there any specific layout considerations for using BCR116E6433HTMA1?

    • Proper PCB layout and thermal management are important for optimal performance, and the datasheet provides guidelines for these aspects.