Infineon Technologies
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
IPB80N06S2H5ATMA1
বিস্তারিত দেখুন ডেটাশিট

IPB80N06S2H5ATMA1

Product Overview

Category

The IPB80N06S2H5ATMA1 belongs to the category of power MOSFETs.

Use

It is commonly used in electronic circuits for switching and amplification applications, particularly in power supplies, motor control, and lighting systems.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge
  • Enhanced thermal performance

Package

The IPB80N06S2H5ATMA1 is typically available in a TO-263-3 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic devices and systems.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities depending on the manufacturer's specifications.

Specifications

  • Drain-Source Voltage (VDS): 60V
  • Continuous Drain Current (ID): 80A
  • On-Resistance (RDS(on)): 6mΩ
  • Power Dissipation (PD): 300W
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IPB80N06S2H5ATMA1 has a standard pin configuration with three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low conduction losses
  • High efficiency
  • Reliable switching behavior
  • Enhanced thermal performance
  • Compatibility with various driving circuits

Advantages and Disadvantages

Advantages

  • High current-carrying capability
  • Low on-resistance for reduced power dissipation
  • Suitable for high-frequency applications
  • Enhanced thermal characteristics

Disadvantages

  • Sensitive to electrostatic discharge (ESD)
  • Requires careful handling during assembly and soldering

Working Principles

The IPB80N06S2H5ATMA1 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient gate-source voltage is applied, the MOSFET enters the "on" state, allowing current to flow through it with minimal resistance.

Detailed Application Field Plans

The IPB80N06S2H5ATMA1 finds extensive use in the following application fields: - Switched-mode power supplies - Motor control systems - LED lighting drivers - Audio amplifiers - DC-DC converters - Solar inverters

Detailed and Complete Alternative Models

Some alternative models to the IPB80N06S2H5ATMA1 include: - IRF840 - FDP8870 - STP80NF03L - AUIRFN8403

In conclusion, the IPB80N06S2H5ATMA1 power MOSFET offers high-performance characteristics suitable for a wide range of power management and control applications, making it an essential component in modern electronic systems.

[Word count: 411]

প্রযুক্তিগত সমাধানে IPB80N06S2H5ATMA1 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure, here are 10 common questions and answers related to the application of IPB80N06S2H5ATMA1 in technical solutions:

  1. Question: What is the maximum drain current for IPB80N06S2H5ATMA1?
    Answer: The maximum drain current for IPB80N06S2H5ATMA1 is 80A.

  2. Question: What is the maximum voltage rating for IPB80N06S2H5ATMA1?
    Answer: The maximum voltage rating for IPB80N06S2H5ATMA1 is 60V.

  3. Question: What type of package does IPB80N06S2H5ATMA1 come in?
    Answer: IPB80N06S2H5ATMA1 comes in a TO263-3 package.

  4. Question: What is the on-resistance for IPB80N06S2H5ATMA1?
    Answer: The on-resistance for IPB80N06S2H5ATMA1 is typically 8mΩ.

  5. Question: What are the typical applications for IPB80N06S2H5ATMA1?
    Answer: IPB80N06S2H5ATMA1 is commonly used in motor control, power supplies, and DC-DC converters.

  6. Question: What is the operating temperature range for IPB80N06S2H5ATMA1?
    Answer: The operating temperature range for IPB80N06S2H5ATMA1 is -55°C to 175°C.

  7. Question: Does IPB80N06S2H5ATMA1 have built-in protection features?
    Answer: Yes, IPB80N06S2H5ATMA1 has built-in overcurrent protection and thermal shutdown.

  8. Question: What is the gate charge for IPB80N06S2H5ATMA1?
    Answer: The gate charge for IPB80N06S2H5ATMA1 is typically 40nC.

  9. Question: Can IPB80N06S2H5ATMA1 be used in automotive applications?
    Answer: Yes, IPB80N06S2H5ATMA1 is suitable for automotive applications.

  10. Question: Is IPB80N06S2H5ATMA1 RoHS compliant?
    Answer: Yes, IPB80N06S2H5ATMA1 is RoHS compliant, making it suitable for use in environmentally sensitive applications.