Infineon Technologies
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
TLE4927CE6547HAMA1
বিস্তারিত দেখুন ডেটাশিট

TLE4927CE6547HAMA1

Product Overview

The TLE4927CE6547HAMA1 belongs to the category of Hall Effect sensors and is designed for use in automotive applications. This sensor possesses characteristics such as high sensitivity, low power consumption, and robustness, making it suitable for various automotive sensing needs. The package includes the sensor itself along with any necessary accessories for installation. The essence of the TLE4927CE6547HAMA1 lies in its ability to accurately detect magnetic fields and convert them into electrical signals. It is typically available in reels or trays, with quantities varying based on customer requirements.

Specifications

  • Operating Voltage: 3.0V to 5.5V
  • Output Current: 8mA
  • Operating Temperature Range: -40°C to 150°C
  • Sensitivity: 2.7mT
  • Package Type: SOT23-3

Detailed Pin Configuration

The TLE4927CE6547HAMA1 features a standard SOT23-3 package with three pins: 1. VCC (Pin 1) - Power supply input 2. GND (Pin 2) - Ground connection 3. OUT (Pin 3) - Output signal

Functional Features

  • High sensitivity to magnetic fields
  • Low power consumption
  • Robust design for automotive environments
  • Fast response time

Advantages and Disadvantages

Advantages

  • Reliable detection of magnetic fields
  • Low power consumption enhances energy efficiency
  • Suitable for harsh automotive environments

Disadvantages

  • Limited operating temperature range compared to some industrial sensors
  • May require additional calibration for specific applications

Working Principles

The TLE4927CE6547HAMA1 operates based on the Hall Effect principle, where a voltage difference is generated across a conductor when subjected to a magnetic field. This voltage is then amplified and converted into a digital output signal, providing an indication of the presence and strength of the magnetic field.

Detailed Application Field Plans

The TLE4927CE6547HAMA1 is well-suited for various automotive applications, including: - Position sensing for throttle pedals and gear shifters - Speed sensing for ABS systems - Brushless DC motor control - Current sensing in battery management systems

Detailed and Complete Alternative Models

Some alternative models to the TLE4927CE6547HAMA1 include: - TLE4927L - TLE4935L - TLE4966K

In summary, the TLE4927CE6547HAMA1 is a versatile Hall Effect sensor designed for automotive applications, offering high sensitivity, low power consumption, and robustness. Its functional features make it suitable for a wide range of automotive sensing needs, although users should consider its operating temperature range and potential calibration requirements. Additionally, alternative models are available to cater to specific application requirements.

Word Count: 411

প্রযুক্তিগত সমাধানে TLE4927CE6547HAMA1 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the TLE4927CE6547HAMA1?

    • The TLE4927CE6547HAMA1 is a high-precision Hall sensor designed for various technical solutions, including position sensing and proximity detection.

  2. What are the key features of the TLE4927CE6547HAMA1?

    • The key features include high sensitivity, temperature stability, and low power consumption, making it suitable for demanding technical applications.

  3. How is the TLE4927CE6547HAMA1 typically used in technical solutions?

    • It is commonly used for non-contact position sensing, speed measurement, and proximity detection in automotive, industrial, and consumer electronics applications.

  4. What is the operating voltage range of the TLE4927CE6547HAMA1?

    • The operating voltage range is typically between 3.5V and 18V, making it compatible with a wide range of electronic systems.

  5. Can the TLE4927CE6547HAMA1 withstand harsh environmental conditions?

    • Yes, it is designed to operate reliably in harsh environments, with robustness against temperature variations and mechanical stress.

  6. What output interfaces does the TLE4927CE6547HAMA1 support?

    • It supports various output interfaces, including analog, PWM, and SENT (Single Edge Nibble Transmission) for seamless integration into different technical solutions.

  7. Is the TLE4927CE6547HAMA1 suitable for safety-critical applications?

    • Yes, it meets stringent safety standards and is suitable for use in safety-critical applications such as automotive braking systems and industrial machinery.

  8. Does the TLE4927CE6547HAMA1 require external calibration?

    • No, it features built-in compensation and does not require external calibration, simplifying the integration process in technical solutions.

  9. What are the typical mounting considerations for the TLE4927CE6547HAMA1?

    • It is typically mounted using standard surface-mount technology (SMT) processes, offering flexibility in PCB design and assembly.

  10. Where can I find detailed technical documentation and support for the TLE4927CE6547HAMA1?

    • Detailed technical documentation and support for the TLE4927CE6547HAMA1 can be found on the manufacturer's website, including datasheets, application notes, and customer support resources.