Intersil
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
ISL6612AIR-T
বিস্তারিত দেখুন ডেটাশিট

ISL6612AIR-T

Product Overview

Category

ISL6612AIR-T belongs to the category of integrated circuits (ICs).

Use

This product is primarily used for power management applications.

Characteristics

  • Integrated circuit
  • Power management solution
  • High efficiency
  • Compact size

Package

ISL6612AIR-T comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6612AIR-T lies in its ability to efficiently manage power in various applications.

Packaging/Quantity

ISL6612AIR-T is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Continuous Output Current: 12A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL6612AIR-T has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin
  4. COMP: Compensation pin
  5. SS: Soft-start pin
  6. EN: Enable pin
  7. PGND: Power ground
  8. VCC: Supply voltage
  9. LX: Switch node
  10. BOOT: Bootstrap capacitor connection

Functional Features

  • High-efficiency synchronous buck controller
  • Adaptive body diode conduction time reduction
  • Adjustable output voltage
  • Programmable soft-start
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Wide input and output voltage range provides flexibility in various applications

Disadvantages

  • Limited maximum continuous output current of 12A may not be suitable for high-power applications
  • Operating temperature range of -40°C to +85°C may restrict usage in extreme environments

Working Principles

ISL6612AIR-T operates as a synchronous buck controller, regulating the output voltage based on the input voltage and load conditions. It utilizes adaptive body diode conduction time reduction to improve efficiency. The feedback pin (FB) and compensation pin (COMP) are used to adjust the output voltage and stability of the system.

Detailed Application Field Plans

ISL6612AIR-T finds applications in various fields, including: 1. Power supplies for computer systems 2. Industrial automation equipment 3. Telecommunications infrastructure 4. Automotive electronics 5. LED lighting systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL6612AIR-T are: 1. LT8610ABEMSE#PBF by Analog Devices Inc. 2. TPS54332DDAR by Texas Instruments 3. MAX15062BATA+T by Maxim Integrated

These alternative models offer similar functionalities and can be used as substitutes depending on specific requirements.

Word count: 335 words

প্রযুক্তিগত সমাধানে ISL6612AIR-T এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of ISL6612AIR-T in technical solutions:

  1. Q: What is ISL6612AIR-T? A: ISL6612AIR-T is a high-performance dual synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL6612AIR-T? A: ISL6612AIR-T supports an input voltage range from 4.5V to 14V.

  3. Q: What is the output voltage range that can be achieved using ISL6612AIR-T? A: The output voltage range achievable with ISL6612AIR-T depends on the external components used, but typically it can support output voltages from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL6612AIR-T can handle? A: ISL6612AIR-T can handle a maximum output current of up to 20A.

  5. Q: Can ISL6612AIR-T operate in a synchronous rectification mode? A: Yes, ISL6612AIR-T can operate in both synchronous and asynchronous rectification modes.

  6. Q: Does ISL6612AIR-T have any built-in protection features? A: Yes, ISL6612AIR-T includes various protection features such as overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: What is the switching frequency range supported by ISL6612AIR-T? A: ISL6612AIR-T supports a wide switching frequency range from 100kHz to 1MHz.

  8. Q: Can ISL6612AIR-T be used in automotive applications? A: Yes, ISL6612AIR-T is suitable for automotive applications as it meets the necessary automotive standards and requirements.

  9. Q: What type of control loop does ISL6612AIR-T use? A: ISL6612AIR-T uses a voltage mode control loop.

  10. Q: Are there any evaluation boards or reference designs available for ISL6612AIR-T? A: Yes, Intersil provides evaluation boards and reference designs for ISL6612AIR-T to help with the development and testing of technical solutions.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.