IXYS
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
IXFN66N85X
বিস্তারিত দেখুন ডেটাশিট

IXFN66N85X

Product Overview

Category

The IXFN66N85X belongs to the category of power MOSFETs.

Use

It is commonly used in power electronics applications such as motor control, power supplies, and inverters.

Characteristics

  • High voltage capability
  • Low on-state resistance
  • Fast switching speed
  • High reliability

Package

The IXFN66N85X is typically available in a TO-268 package.

Essence

This power MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 650V
  • Current Rating: 66A
  • On-State Resistance: 0.085 Ohms
  • Gate-Source Voltage (Max): ±20V
  • Power Dissipation: 300W

Detailed Pin Configuration

The IXFN66N85X typically has three pins: 1. Source (S) 2. Drain (D) 3. Gate (G)

Functional Features

  • Low conduction losses
  • High efficiency
  • Enhanced thermal performance
  • Robustness against high voltage spikes

Advantages

  • High voltage capability
  • Low on-state resistance
  • Fast switching speed
  • Suitable for high-power applications

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Requires careful thermal management due to high power dissipation

Working Principles

The IXFN66N85X operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the source and drain terminals.

Detailed Application Field Plans

The IXFN66N85X is widely used in the following applications: - Motor drives - Uninterruptible power supplies (UPS) - Solar inverters - Industrial power systems

Detailed and Complete Alternative Models

Some alternative models to the IXFN66N85X include: - IRFP4668PBF - STP80NF70

In conclusion, the IXFN66N85X power MOSFET offers high-performance characteristics suitable for demanding power electronics applications, making it a preferred choice for efficient power management and control.

Word Count: 311

প্রযুক্তিগত সমাধানে IXFN66N85X এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the maximum drain-source voltage of IXFN66N85X?

    • The maximum drain-source voltage of IXFN66N85X is 850V.

  2. What is the continuous drain current rating of IXFN66N85X?

    • The continuous drain current rating of IXFN66N85X is 66A.

  3. Can IXFN66N85X be used in high-frequency switching applications?

    • Yes, IXFN66N85X is suitable for high-frequency switching applications due to its fast switching characteristics.

  4. What is the typical on-state resistance of IXFN66N85X?

    • The typical on-state resistance of IXFN66N85X is 0.085 ohms.

  5. Is IXFN66N85X suitable for motor drive applications?

    • Yes, IXFN66N85X can be used in motor drive applications due to its high current handling capability.

  6. Does IXFN66N85X require a heat sink for operation?

    • Yes, IXFN66N85X may require a heat sink depending on the application and power dissipation requirements.

  7. What is the maximum junction temperature of IXFN66N85X?

    • The maximum junction temperature of IXFN66N85X is 175°C.

  8. Can IXFN66N85X be used in parallel to increase current handling capacity?

    • Yes, IXFN66N85X can be used in parallel to increase the overall current handling capacity in certain applications.

  9. What are the recommended gate drive voltage levels for IXFN66N85X?

    • The recommended gate drive voltage levels for IXFN66N85X typically range from 10V to 15V.

  10. Is IXFN66N85X RoHS compliant?

    • Yes, IXFN66N85X is RoHS compliant, making it suitable for environmentally conscious designs.