IXYS
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
IXFP90N20X3
বিস্তারিত দেখুন ডেটাশিট

IXFP90N20X3

Product Overview

Category

The IXFP90N20X3 belongs to the category of power MOSFETs.

Use

It is used for high-power switching applications in various electronic circuits and systems.

Characteristics

  • High voltage and current handling capabilities
  • Low on-state resistance
  • Fast switching speed
  • Low gate drive power requirements

Package

The IXFP90N20X3 is typically available in a TO-220 package.

Essence

The essence of the IXFP90N20X3 lies in its ability to efficiently control high-power loads in electronic devices.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 200V
  • Current Rating: 90A
  • On-State Resistance: 0.038Ω
  • Gate Threshold Voltage: 2.5V
  • Power Dissipation: 300W

Detailed Pin Configuration

The IXFP90N20X3 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage and current handling capacity
  • Low on-state resistance for minimal power loss
  • Fast switching speed for efficient operation
  • Robust construction for reliability in demanding applications

Advantages

  • Suitable for high-power applications
  • Low conduction losses
  • Enhanced efficiency in power management systems

Disadvantages

  • Higher cost compared to lower power MOSFETs
  • Requires careful thermal management due to high power dissipation

Working Principles

The IXFP90N20X3 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IXFP90N20X3 is widely used in: - Switch-mode power supplies - Motor control systems - Inverters and converters - Industrial automation equipment - Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to the IXFP90N20X3 include: - IRFP90N20DPbF - FDPF90N20 - STP90N20

In conclusion, the IXFP90N20X3 is a high-performance power MOSFET designed for demanding applications that require efficient high-power switching capabilities.

[Word Count: 313]

প্রযুক্তিগত সমাধানে IXFP90N20X3 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the maximum drain-source voltage of IXFP90N20X3?

    • The maximum drain-source voltage of IXFP90N20X3 is 200V.

  2. What is the continuous drain current rating of IXFP90N20X3?

    • The continuous drain current rating of IXFP90N20X3 is 90A.

  3. What is the on-state resistance (RDS(on)) of IXFP90N20X3?

    • The on-state resistance (RDS(on)) of IXFP90N20X3 is typically 0.019 ohms.

  4. Can IXFP90N20X3 be used in high-power applications?

    • Yes, IXFP90N20X3 is suitable for high-power applications due to its high current and voltage ratings.

  5. What type of package does IXFP90N20X3 come in?

    • IXFP90N20X3 comes in a TO-220 package.

  6. Is IXFP90N20X3 suitable for switching applications?

    • Yes, IXFP90N20X3 is designed for use in high-speed switching applications.

  7. What is the operating temperature range of IXFP90N20X3?

    • The operating temperature range of IXFP90N20X3 is typically -55°C to 175°C.

  8. Does IXFP90N20X3 require a heat sink for thermal management?

    • Depending on the application and power dissipation, a heat sink may be required for optimal thermal management of IXFP90N20X3.

  9. Can IXFP90N20X3 be used in automotive applications?

    • Yes, IXFP90N20X3 is suitable for use in automotive applications, provided it meets the specific requirements and standards for automotive electronics.

  10. What are some common technical solutions that utilize IXFP90N20X3?

    • Common technical solutions that utilize IXFP90N20X3 include motor control, power supplies, inverters, and industrial automation equipment.