Mallory Sonalert Products Inc.
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
PS-723BQ
বিস্তারিত দেখুন ডেটাশিট

PS-723BQ Product Overview

Introduction

PS-723BQ is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220, TO-263, D2PAK
  • Essence: Ensures stable and regulated power supply
  • Packaging/Quantity: Typically available in reels or tubes containing 100 to 1000 units

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.25V to 20V
  • Output Current: Up to 3A
  • Dropout Voltage: 0.6V at 3A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The PS-723BQ has a standard pin configuration with input, output, and ground pins. The pinout is as follows: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Ensures efficient operation even when the input voltage is close to the output voltage
  • Thermal Shutdown Protection: Protects the regulator from overheating, enhancing its reliability

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced safety

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited maximum output current

Working Principles

The PS-723BQ utilizes a feedback control mechanism to maintain a constant output voltage despite variations in the input voltage and load conditions. It compares the actual output voltage to a reference voltage and adjusts the internal circuitry to achieve the desired output.

Detailed Application Field Plans

The PS-723BQ is commonly used in the following applications: - Power supplies for consumer electronics - Battery-powered devices - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to PS-723BQ include: - LM317: A popular adjustable linear voltage regulator - LM7805: Fixed 5V voltage regulator - LT1083: High-current adjustable voltage regulator

In conclusion, the PS-723BQ voltage regulator offers precise and reliable voltage regulation, making it suitable for a wide range of electronic applications. While it has certain limitations, its functional features and application versatility make it a valuable component in the field of electronics.

[Word Count: 456]

প্রযুক্তিগত সমাধানে PS-723BQ এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is PS-723BQ?

    • PS-723BQ is a high-performance adhesive sealant commonly used in technical solutions for bonding and sealing applications.

  2. What materials can PS-723BQ bond to?

    • PS-723BQ can bond to a wide range of materials including metals, plastics, glass, and composites.

  3. What is the recommended application temperature for PS-723BQ?

    • The recommended application temperature for PS-723BQ is between 40°F and 100°F (4°C and 38°C).

  4. How long does it take for PS-723BQ to cure?

    • PS-723BQ typically cures within 24 hours, depending on environmental conditions such as temperature and humidity.

  5. Is PS-723BQ resistant to chemicals and solvents?

    • Yes, PS-723BQ exhibits excellent resistance to a wide range of chemicals and solvents once fully cured.

  6. Can PS-723BQ be painted over?

    • Yes, PS-723BQ can be painted over once it has fully cured.

  7. What is the shelf life of PS-723BQ?

    • The shelf life of PS-723BQ is typically 12 months when stored in its original unopened container at room temperature.

  8. Does PS-723BQ require surface preparation before application?

    • Yes, surfaces should be clean, dry, and free from any contaminants or residues before applying PS-723BQ for optimal adhesion.

  9. Is PS-723BQ suitable for outdoor applications?

    • Yes, PS-723BQ is suitable for outdoor applications as it exhibits excellent weather and UV resistance.

  10. Can PS-723BQ be used for structural bonding?

    • PS-723BQ is not recommended for structural bonding applications, but it is suitable for a wide range of industrial and technical bonding and sealing applications.