The MT46V16M16P-5B:M has a total of 66 pins. The pin configuration is as follows:
Advantages: - Fast data access and retrieval - Large storage capacity - Compatible with a wide range of electronic devices - Low power consumption
Disadvantages: - Volatile memory, requires constant power supply to retain data - Relatively higher cost compared to other memory technologies
The MT46V16M16P-5B:M operates based on the principles of dynamic random access memory (DRAM). It stores data in capacitors within each memory cell, which are periodically refreshed to maintain the stored information. When data needs to be accessed or written, the appropriate row and column addresses are provided, allowing the memory controller to read or write the data from/to the specific memory location.
The MT46V16M16P-5B:M is commonly used in various electronic devices and systems, including: - Personal computers - Laptops - Servers - Networking equipment - Gaming consoles - Mobile devices
Some alternative models to the MT46V16M16P-5B:M include: - MT46V32M16P-5B:M: 512 Megabit (Mb) capacity, 32 Megabytes (MB) x 16 bits organization - MT46H64M16LFBF-6IT:A: 1 Gigabit (Gb) capacity, 64 Megabytes (MB) x 16 bits organization - MT47H128M8HQ-25E:B: 2 Gigabit (Gb) capacity, 128 Megabytes (MB) x 8 bits organization
(Note: The above alternative models are for illustrative purposes only and may not represent the latest available options.)
Word count: 457 words
Sure! Here are 10 common questions and answers related to the application of MT46V16M16P-5B:M in technical solutions:
Q: What is the MT46V16M16P-5B:M? A: The MT46V16M16P-5B:M is a specific type of synchronous dynamic random-access memory (SDRAM) module commonly used in computer systems.
Q: What is the capacity of the MT46V16M16P-5B:M? A: The MT46V16M16P-5B:M has a capacity of 256 megabits (Mb), which is equivalent to 32 megabytes (MB).
Q: What is the speed rating of the MT46V16M16P-5B:M? A: The "5B" in the part number indicates that the MT46V16M16P-5B:M operates at a maximum clock frequency of 200 MHz.
Q: What voltage does the MT46V16M16P-5B:M require? A: The MT46V16M16P-5B:M operates at a supply voltage of 2.5 volts (V).
Q: Can the MT46V16M16P-5B:M be used in both commercial and industrial applications? A: Yes, the MT46V16M16P-5B:M is designed to meet the requirements of both commercial and industrial temperature ranges.
Q: What is the pin configuration of the MT46V16M16P-5B:M? A: The MT46V16M16P-5B:M has a 66-pin TSOP II package with a specific pinout for connecting to the system.
Q: Is the MT46V16M16P-5B:M compatible with DDR2 memory interfaces? A: Yes, the MT46V16M16P-5B:M is designed to be compatible with DDR2 memory interfaces.
Q: Can the MT46V16M16P-5B:M be used in high-performance computing applications? A: Yes, the MT46V16M16P-5B:M is suitable for use in various high-performance computing applications, including servers and workstations.
Q: Does the MT46V16M16P-5B:M support ECC (Error Correction Code) functionality? A: No, the MT46V16M16P-5B:M does not support ECC functionality. It is a non-ECC memory module.
Q: Are there any specific timing requirements for using the MT46V16M16P-5B:M? A: Yes, the MT46V16M16P-5B:M has specific timing parameters that need to be followed for proper operation. These timings are specified in the datasheet provided by the manufacturer.
Please note that these answers are general and may vary depending on the specific application and system requirements.