Microsemi Corporation
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
JANTX1N4495C
বিস্তারিত দেখুন ডেটাশিট

JANTX1N4495C

Product Overview

Category

The JANTX1N4495C belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification and voltage regulation.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High surge current capability

Package

The JANTX1N4495C is typically available in a DO-35 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for voltage regulation in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1V
  • Maximum Reverse Voltage: 200V
  • Maximum Average Rectified Current: 1A
  • Maximum Surge Current: 30A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The JANTX1N4495C has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Fast response time for switching applications
  • High surge current capability for protection against transient overloads

Advantages and Disadvantages

Advantages

  • High reliability and durability
  • Low forward voltage drop leading to minimal power loss
  • Fast switching speed for efficient performance in high-frequency applications

Disadvantages

  • Limited maximum average rectified current compared to some higher-power diodes
  • Relatively lower reverse voltage rating compared to other diodes in its class

Working Principles

The JANTX1N4495C operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the opposite direction. When forward-biased, it conducts current with low resistance, enabling efficient rectification and voltage regulation.

Detailed Application Field Plans

The JANTX1N4495C is widely used in: - Power supply units - Voltage regulators - Switching circuits - Signal demodulation circuits - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4495C include: - 1N4004 - 1N5408 - 1N5819 - 1N4148 - 1N4937

In summary, the JANTX1N4495C is a reliable semiconductor diode with fast switching characteristics, making it suitable for various electronic applications requiring rectification and voltage regulation. Its high surge current capability and low forward voltage drop contribute to its efficiency and performance in diverse circuit designs.

[Word count: 443]

প্রযুক্তিগত সমাধানে JANTX1N4495C এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure, here are 10 common questions and answers related to the application of JANTX1N4495C:

  1. What is the JANTX1N4495C diode used for?

    • The JANTX1N4495C is a high-reliability silicon power rectifier diode commonly used in military and aerospace applications.

  2. What are the key features of the JANTX1N4495C diode?

    • The key features include a high surge current capability, low forward voltage drop, and high reliability.

  3. What are the typical applications of the JANTX1N4495C diode?

    • Typical applications include power supplies, inverters, converters, and other high-reliability electronic systems.

  4. What is the maximum forward voltage of the JANTX1N4495C diode?

    • The maximum forward voltage is typically around 1.1 volts at a forward current of 15 amps.

  5. What is the maximum reverse voltage of the JANTX1N4495C diode?

    • The maximum reverse voltage is 200 volts.

  6. What is the operating temperature range of the JANTX1N4495C diode?

    • The operating temperature range is typically -65°C to +175°C.

  7. Is the JANTX1N4495C diode suitable for high-reliability applications?

    • Yes, the JANTX1N4495C diode is specifically designed and tested for high-reliability applications, making it suitable for use in critical systems.

  8. Does the JANTX1N4495C diode have any special packaging requirements?

    • Yes, it is available in various package options, including axial-lead and surface-mount packages, to meet different application needs.

  9. Can the JANTX1N4495C diode handle high surge currents?

    • Yes, it is designed to handle high surge currents, making it suitable for demanding applications.

  10. Is the JANTX1N4495C diode compliant with industry standards?

    • Yes, it is compliant with MIL-PRF-19500/534, ensuring its reliability and performance in military and aerospace applications.