Microsemi Corporation
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
M15KP90A
বিস্তারিত দেখুন ডেটাশিট

M15KP90A Product Overview

Introduction

The M15KP90A is a crucial component in the field of electronic circuit protection. This device belongs to the category of transient voltage suppressor diodes and is widely used for safeguarding sensitive electronic equipment from voltage spikes and transients. In this entry, we will delve into the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the M15KP90A.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: DO-204AC (DO-15)
  • Essence: Safeguarding sensitive electronic equipment
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Peak Pulse Power: 15kW
  • Standoff Voltage: 90V
  • Breakdown Voltage: 100V
  • Maximum Clamping Voltage: 146V
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The M15KP90A typically follows the standard DO-15 package configuration with two leads.

Functional Features

  • Rapid response to transient voltage surges
  • High surge capability for reliable protection
  • Low clamping voltage to minimize stress on protected circuits

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Higher cost compared to traditional diodes
  • Requires careful handling due to its sensitivity to electrostatic discharge

Working Principles

The M15KP90A operates by diverting excessive transient current away from sensitive components when a voltage surge occurs. It rapidly clamps the voltage to a safe level, protecting downstream circuitry.

Detailed Application Field Plans

The M15KP90A finds extensive use in various applications including: - Power supplies - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • M15KP6.8A
  • M15KP10A
  • M15KP13A
  • M15KP16A
  • M15KP18A

In conclusion, the M15KP90A transient voltage suppressor diode plays a critical role in protecting electronic equipment from voltage surges and transients. Its fast response time, high surge capability, and low clamping voltage make it an essential component in numerous electronic applications.

[Word count: 398]

প্রযুক্তিগত সমাধানে M15KP90A এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is M15KP90A?

    • M15KP90A is a transient voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.

  2. What is the maximum peak pulse power of M15KP90A?

    • The maximum peak pulse power of M15KP90A is 15,000 watts.

  3. What is the breakdown voltage of M15KP90A?

    • The breakdown voltage of M15KP90A is 90 volts.

  4. What are the typical applications of M15KP90A?

    • M15KP90A is commonly used in surge protection for telecommunications equipment, industrial control systems, and automotive electronics.

  5. What is the response time of M15KP90A?

    • The response time of M15KP90A is very fast, typically in the nanosecond range.

  6. How does M15KP90A protect electronic circuits?

    • M15KP90A clamps the voltage during transient events, diverting excess current away from sensitive components and preventing damage.

  7. Is M15KP90A suitable for high-speed data lines?

    • Yes, M15KP90A is suitable for protecting high-speed data lines such as Ethernet, USB, and HDMI interfaces.

  8. Can M15KP90A be used in outdoor applications?

    • Yes, M15KP90A is often used in outdoor applications due to its ability to withstand harsh environmental conditions.

  9. What is the operating temperature range of M15KP90A?

    • The operating temperature range of M15KP90A is typically -55°C to 175°C.

  10. Are there any recommended mounting and handling precautions for M15KP90A?

    • Yes, it is recommended to follow proper ESD (electrostatic discharge) precautions and use appropriate soldering techniques to ensure the reliability of M15KP90A in technical solutions.