Microsemi Corporation
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
SMBG4762E3/TR13
বিস্তারিত দেখুন ডেটাশিট

SMBG4762E3/TR13

Product Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, compact size
  • Package: SOT-23
  • Essence: Efficient voltage regulation for various electronic applications
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage: 3.3V
  • Output Current: 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1 (VIN): Input voltage
  • Pin 2 (GND): Ground
  • Pin 3 (VOUT): Output voltage

Functional Features

  • High Precision: Provides accurate output voltage regulation
  • Low Dropout Voltage: Ensures efficient operation even with small input-output differentials
  • Compact Size: Ideal for space-constrained applications

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Low dropout voltage
  • Compact size

Disadvantages

  • Limited output current capacity
  • Restricted input voltage range

Working Principles

The SMBG4762E3/TR13 operates by comparing the actual output voltage to a reference voltage and adjusting the internal circuitry to maintain a stable output.

Detailed Application Field Plans

The SMBG4762E3/TR13 is suitable for a wide range of applications including battery-powered devices, portable electronics, and automotive systems where precise voltage regulation is essential.

Detailed and Complete Alternative Models

  • SMBG4762E3/TR14: Similar specifications with adjustable output voltage
  • SMBG4763E3/TR13: Higher output current capacity with slightly larger package size

This comprehensive entry provides detailed information about the SMBG4762E3/TR13, covering its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

প্রযুক্তিগত সমাধানে SMBG4762E3/TR13 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is SMBG4762E3/TR13?

    • SMBG4762E3/TR13 is a specific model of a surface mount diode used in electronic circuits.

  2. What are the key specifications of SMBG4762E3/TR13?

    • The key specifications include its voltage rating, current rating, power dissipation, and package type.

  3. How is SMBG4762E3/TR13 typically used in technical solutions?

    • SMBG4762E3/TR13 is commonly used for overvoltage protection, reverse polarity protection, and transient voltage suppression in various electronic applications.

  4. What are the recommended operating conditions for SMBG4762E3/TR13?

    • The recommended operating conditions typically include temperature range, maximum forward voltage, and maximum reverse current.

  5. Are there any application notes or reference designs available for using SMBG4762E3/TR13?

    • Yes, manufacturers often provide application notes and reference designs for incorporating SMBG4762E3/TR13 into different technical solutions.

  6. What are the typical failure modes of SMBG4762E3/TR13?

    • Common failure modes may include thermal runaway, breakdown due to excessive voltage, and degradation over time.

  7. Can SMBG4762E3/TR13 be used in automotive applications?

    • Yes, SMBG4762E3/TR13 is suitable for automotive applications where transient voltage protection is required.

  8. What are the industry standards or certifications relevant to SMBG4762E3/TR13?

    • SMBG4762E3/TR13 may comply with industry standards such as AEC-Q101 for automotive-grade components or IEC standards for general electronic components.

  9. How does SMBG4762E3/TR13 compare to similar diodes in terms of performance and cost?

    • Comparisons can be made based on parameters like clamping voltage, response time, and pricing to evaluate the suitability of SMBG4762E3/TR13 for specific applications.

  10. Are there any known compatibility issues or considerations when integrating SMBG4762E3/TR13 into existing circuit designs?

    • It's important to consider factors such as footprint compatibility, thermal management, and potential interactions with other components in the circuit.