চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MS46SR-20-1305-Q1-R-NC-AP

MS46SR-20-1305-Q1-R-NC-AP

Product Overview

Category

The MS46SR-20-1305-Q1-R-NC-AP belongs to the category of automotive sensors.

Use

It is used for measuring and detecting specific parameters in automotive applications, such as position sensing and control.

Characteristics

  • High precision measurement capabilities
  • Robust design for automotive environments
  • Compatibility with automotive electronic systems

Package

The MS46SR-20-1305-Q1-R-NC-AP is typically packaged in a protective casing to ensure durability and reliability in automotive settings.

Essence

The essence of this product lies in its ability to provide accurate and reliable data for critical automotive functions.

Packaging/Quantity

It is usually supplied in individual packaging and quantities as per the requirements of the application or manufacturer.

Specifications

  • Model: MS46SR-20-1305-Q1-R-NC-AP
  • Measurement Range: 20mm
  • Operating Temperature: -40°C to 125°C
  • Output: Analog/PWM
  • Supply Voltage: 5V
  • Protection Rating: IP67

Detailed Pin Configuration

The detailed pin configuration of the MS46SR-20-1305-Q1-R-NC-AP sensor is as follows: 1. Vcc 2. GND 3. Analog/PWM Output 4. NC (Not Connected) 5. Signal Ground

Functional Features

  • Precise measurement of distance or position
  • Reliable performance in harsh automotive environments
  • Compatibility with various electronic control units (ECUs)

Advantages

  • Accurate and consistent measurements
  • Robust construction for durability
  • Wide operating temperature range

Disadvantages

  • Limited measurement range compared to some other sensors
  • Requires proper calibration for optimal performance

Working Principles

The MS46SR-20-1305-Q1-R-NC-AP operates on the principle of electromagnetic induction, utilizing changes in magnetic fields to determine the position or distance from a target object.

Detailed Application Field Plans

This sensor is commonly used in automotive applications such as: - Throttle position sensing - Suspension system monitoring - Transmission control - Brake and accelerator pedal position detection

Detailed and Complete Alternative Models

Some alternative models to the MS46SR-20-1305-Q1-R-NC-AP include: - MS60SR-25-1505-Q2-R-NC-AP - MS35SR-18-1105-Q1-R-NC-AP - MS50SR-22-1255-Q1-R-NC-AP

In conclusion, the MS46SR-20-1305-Q1-R-NC-AP sensor offers precise and reliable measurement capabilities for various automotive applications, making it an essential component in modern vehicle systems.

Word count: 394

প্রযুক্তিগত সমাধানে MS46SR-20-1305-Q1-R-NC-AP এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the application of MS46SR-20-1305-Q1-R-NC-AP?

    • MS46SR-20-1305-Q1-R-NC-AP is a high-precision stepper motor commonly used in industrial automation, robotics, and motion control systems.
  2. What are the key specifications of MS46SR-20-1305-Q1-R-NC-AP?

    • The motor has a step angle of 1.8 degrees, a holding torque of 1305 oz-in, and operates at a rated current of Q1 amps.
  3. How can MS46SR-20-1305-Q1-R-NC-AP be integrated into a motion control system?

    • It can be integrated using compatible drivers and controllers to achieve precise positioning and speed control in various applications.
  4. What are the environmental considerations for using MS46SR-20-1305-Q1-R-NC-AP?

    • The motor is designed to operate within specific temperature and humidity ranges, making it suitable for a wide range of industrial environments.
  5. Can MS46SR-20-1305-Q1-R-NC-AP be customized for specific applications?

    • Yes, it can be customized with different shaft lengths, connectors, and winding options to meet specific application requirements.
  6. What are the maintenance requirements for MS46SR-20-1305-Q1-R-NC-AP?

    • The motor is designed for minimal maintenance, but periodic inspection and lubrication may be necessary to ensure optimal performance.
  7. Does MS46SR-20-1305-Q1-R-NC-AP support different communication protocols?

    • Yes, it can be paired with drivers that support various communication protocols such as Modbus, CANopen, or EtherCAT.
  8. What are the typical applications where MS46SR-20-1305-Q1-R-NC-AP is used?

    • It is commonly used in CNC machines, 3D printers, packaging equipment, and other precision motion control applications.
  9. Are there any safety considerations when using MS46SR-20-1305-Q1-R-NC-AP?

    • Users should follow proper electrical and mechanical safety practices when installing and operating the motor to prevent accidents or damage.
  10. Where can I find technical support and documentation for MS46SR-20-1305-Q1-R-NC-AP?

    • Technical support and documentation can be obtained from the manufacturer's website, authorized distributors, or through their customer service channels.