ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
ATP404-TL-H
বিস্তারিত দেখুন ডেটাশিট

ATP404-TL-H

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, low power consumption
Package: 16-pin TSSOP
Essence: Regulates and manages power supply
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 4A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Pin 1) - Input voltage
  2. SW (Pin 2) - Switch node for inductor
  3. GND (Pin 3) - Ground
  4. PGND (Pin 4) - Power ground
  5. FB (Pin 5) - Feedback voltage
  6. EN (Pin 6) - Enable pin
  7. SS/TRK (Pin 7) - Soft-start/tracking
  8. COMP (Pin 8) - Compensation
  9. VOUT (Pin 9) - Output voltage
  10. AGND (Pin 10) - Analog ground
  11. NC (Pin 11) - No connection
  12. NC (Pin 12) - No connection
  13. NC (Pin 13) - No connection
  14. NC (Pin 14) - No connection
  15. NC (Pin 15) - No connection
  16. BOOT (Pin 16) - Bootstrap capacitor connection

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency for reduced power loss
  • Adjustable output voltage for flexibility
  • Overcurrent and overtemperature protection for reliability
  • Soft-start function for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Overcurrent and overtemperature protection

Disadvantages: - Limited maximum output current - Requires external components for operation

Working Principles

ATP404-TL-H is a buck converter integrated circuit that regulates the input voltage to a lower, stable output voltage. It utilizes a high-efficiency switching mechanism to minimize power loss and maximize energy transfer.

Detailed Application Field Plans

The ATP404-TL-H is suitable for various applications including: - Portable electronic devices - Industrial automation systems - Automotive electronics - LED lighting systems

Detailed and Complete Alternative Models

  1. ATP405-TL-H
  2. ATP406-TL-H
  3. ATP407-TL-H
  4. ATP408-TL-H

These alternative models offer similar functionality with slight variations in specifications and package options.

This content provides a comprehensive overview of ATP404-TL-H, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

প্রযুক্তিগত সমাধানে ATP404-TL-H এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is ATP404-TL-H?

    • ATP404-TL-H is a high-performance thermal interface material designed for use in electronic devices to improve heat dissipation.

  2. What are the key features of ATP404-TL-H?

    • ATP404-TL-H offers high thermal conductivity, low thermal resistance, excellent stability over a wide temperature range, and compatibility with various substrates.

  3. How does ATP404-TL-H improve heat dissipation in electronic devices?

    • ATP404-TL-H fills gaps and irregularities between heat-generating components and heat sinks, facilitating efficient transfer of heat away from the electronic devices.

  4. In what applications can ATP404-TL-H be used?

    • ATP404-TL-H is commonly used in applications such as CPUs, GPUs, power electronics, LED lighting, automotive electronics, and other electronic devices requiring effective thermal management.

  5. Is ATP404-TL-H electrically conductive?

    • No, ATP404-TL-H is non-electrically conductive, making it safe to use in electronic applications where electrical isolation is required.

  6. What is the recommended application method for ATP404-TL-H?

    • ATP404-TL-H is typically applied using a dispensing or printing method to ensure uniform coverage and optimal thermal performance.

  7. Does ATP404-TL-H require any curing process after application?

    • No, ATP404-TL-H is a non-curing thermal interface material, simplifying the assembly process and reducing production time.

  8. What is the operating temperature range of ATP404-TL-H?

    • ATP404-TL-H has a broad operating temperature range, typically from -40°C to 150°C, making it suitable for diverse environmental conditions.

  9. Can ATP404-TL-H be customized for specific application requirements?

    • Yes, ATP404-TL-H can be tailored to meet specific thermal conductivity, thickness, and dielectric strength requirements based on the application's needs.

  10. Are there any safety considerations when handling ATP404-TL-H?

    • Users should refer to the material safety data sheet (MSDS) for proper handling and storage guidelines. Avoid contact with eyes and skin, and use in a well-ventilated area.