ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
FAN7602BM
বিস্তারিত দেখুন ডেটাশিট

FAN7602BM

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOP-8 (Small Outline Package)
  • Essence: PWM Controller for Switching Power Supplies
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 9V to 30V
  • Output Voltage Range: 5V to 24V
  • Maximum Output Current: 2A
  • Operating Frequency: 65kHz to 115kHz
  • Duty Cycle Range: 0% to 100%
  • Standby Power Consumption: <1mW
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The FAN7602BM IC has the following pin configuration:

  1. VCC: Power Supply Input
  2. GND: Ground
  3. FB: Feedback Input
  4. COMP: Compensation Pin
  5. CS: Current Sense Input
  6. RT/CT: Timing Components Connection
  7. DRAIN: Power MOSFET Drain Connection
  8. SOURCE: Power MOSFET Source Connection

Functional Features

  • Pulse Width Modulation (PWM) Control
  • Over-Temperature Protection
  • Over-Voltage Protection
  • Under-Voltage Lockout
  • Soft Start Function
  • Adjustable Output Voltage
  • Error Amplifier with Internal Reference

Advantages and Disadvantages

Advantages: - High Efficiency - Low Power Consumption - Wide Input Voltage Range - Adjustable Output Voltage - Comprehensive Protection Features

Disadvantages: - Limited Maximum Output Current (2A) - Requires External Timing Components

Working Principles

The FAN7602BM is a PWM controller designed for switching power supplies. It operates by regulating the duty cycle of the PWM signal to control the output voltage. The feedback input (FB) compares the actual output voltage with a reference voltage, and the error amplifier adjusts the duty cycle accordingly. The compensation pin (COMP) allows for stability optimization by connecting external components. The CS pin senses the current flowing through the power MOSFET, enabling over-current protection. The DRAIN and SOURCE pins are connected to the power MOSFET for switching operation.

Detailed Application Field Plans

The FAN7602BM is commonly used in various applications, including:

  1. AC-DC Power Supplies
  2. LED Lighting Systems
  3. Battery Chargers
  4. Industrial Control Systems
  5. Consumer Electronics

Detailed and Complete Alternative Models

  1. FAN7601BM: Similar specifications and features, but with a different pin configuration.
  2. FAN7603BM: Higher maximum output current (3A), suitable for applications requiring higher power.
  3. FAN7604BM: Lower standby power consumption (<0.5mW), ideal for energy-efficient designs.

These alternative models provide flexibility in choosing the most suitable PWM controller based on specific requirements.

Word count: 345 words

প্রযুক্তিগত সমাধানে FAN7602BM এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of FAN7602BM in technical solutions:

  1. Q: What is FAN7602BM? A: FAN7602BM is a high-performance, integrated PWM controller IC designed for offline and DC-DC converter applications.

  2. Q: What are the key features of FAN7602BM? A: The key features of FAN7602BM include high voltage startup, precise current limit, adjustable frequency, soft-start function, and built-in protections.

  3. Q: What is the typical operating voltage range for FAN7602BM? A: FAN7602BM operates within a typical voltage range of 9V to 38V.

  4. Q: Can FAN7602BM be used in both offline and DC-DC converter applications? A: Yes, FAN7602BM is specifically designed to be used in both offline and DC-DC converter applications.

  5. Q: What is the maximum switching frequency supported by FAN7602BM? A: FAN7602BM supports a maximum switching frequency of up to 200kHz.

  6. Q: Does FAN7602BM have any built-in protection features? A: Yes, FAN7602BM has built-in protections such as overvoltage protection (OVP), overload protection (OLP), and thermal shutdown.

  7. Q: Can FAN7602BM be used in high-power applications? A: Yes, FAN7602BM can be used in high-power applications as it supports a wide input voltage range and has a precise current limit.

  8. Q: Is FAN7602BM suitable for flyback converter designs? A: Yes, FAN7602BM is suitable for flyback converter designs as it provides high voltage startup and adjustable frequency control.

  9. Q: Can FAN7602BM be used in battery charging applications? A: Yes, FAN7602BM can be used in battery charging applications as it supports a wide input voltage range and has built-in protections.

  10. Q: Are there any application notes or reference designs available for FAN7602BM? A: Yes, the manufacturer of FAN7602BM provides application notes and reference designs that can help in implementing the IC in various technical solutions.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.