ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MPSA64RLRAG
বিস্তারিত দেখুন ডেটাশিট

MPSA64RLRAG

Product Overview

Category

The MPSA64RLRAG belongs to the category of bipolar transistors.

Use

It is commonly used for amplification and switching of electronic signals in various applications.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise
  • High voltage capability

Package

The MPSA64RLRAG is typically available in a TO-92 package.

Essence

This transistor is essential for electronic circuit design, especially in low-power applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (VCBO): 30V
  • Collector-Emitter Voltage (VCEO): 30V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 100MHz

Detailed Pin Configuration

The MPSA64RLRAG has three pins: collector, base, and emitter. The pinout configuration is as follows: 1. Collector (C) - Pin 1 2. Base (B) - Pin 2 3. Emitter (E) - Pin 3

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed
  • Wide operating temperature range

Advantages and Disadvantages

Advantages

  • Low power dissipation
  • High current gain
  • Suitable for low-power applications

Disadvantages

  • Limited maximum voltage and current ratings
  • Relatively low transition frequency compared to other transistors

Working Principles

The MPSA64RLRAG operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its terminals to amplify or switch electronic signals.

Detailed Application Field Plans

The MPSA64RLRAG is widely used in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits - Oscillator circuits - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models to the MPSA64RLRAG include: - BC547 - 2N3904 - 2N2222 - PN2222

In conclusion, the MPSA64RLRAG is a versatile bipolar transistor with characteristics suitable for various electronic applications, particularly those requiring low power dissipation and high current gain.

Word Count: 320

প্রযুক্তিগত সমাধানে MPSA64RLRAG এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is MPSA64RLRAG?

    • MPSA64RLRAG is a general-purpose NPN bipolar junction transistor (BJT) commonly used in electronic circuits for amplification and switching applications.

  2. What are the key specifications of MPSA64RLRAG?

    • The MPSA64RLRAG has a maximum collector current of 500mA, a maximum collector-emitter voltage of 30V, and a maximum power dissipation of 625mW.

  3. How can MPSA64RLRAG be used in amplifier circuits?

    • MPSA64RLRAG can be used as a small-signal amplifier in audio and other low-power applications due to its high current gain and low noise characteristics.

  4. In what types of switching applications can MPSA64RLRAG be utilized?

    • MPSA64RLRAG can be used in low-power switching applications such as relay drivers, LED drivers, and general purpose digital switching.

  5. What are the typical operating conditions for MPSA64RLRAG?

    • The typical operating conditions for MPSA64RLRAG include a collector current of 100mA, a collector-emitter voltage of 10V, and a base current of 5mA.

  6. Can MPSA64RLRAG be used in high-frequency applications?

    • No, MPSA64RLRAG is not suitable for high-frequency applications due to its limited transition frequency and capacitance characteristics.

  7. What are the recommended storage and operating temperatures for MPSA64RLRAG?

    • The recommended storage temperature range for MPSA64RLRAG is -55°C to +150°C, and the recommended operating temperature range is -55°C to +150°C.

  8. Are there any specific considerations for PCB layout when using MPSA64RLRAG?

    • It is important to minimize lead lengths and keep the emitter and base connections as short as possible to reduce parasitic effects and ensure stable performance.

  9. Can MPSA64RLRAG be used in automotive applications?

    • Yes, MPSA64RLRAG can be used in automotive applications that require low-power amplification or switching functions within the specified operating temperature range.

  10. Where can I find detailed application notes and reference designs for using MPSA64RLRAG in technical solutions?

    • Detailed application notes and reference designs for MPSA64RLRAG can be found on the manufacturer's website, distributor websites, or in technical literature related to BJT applications.