ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MPSA92RLRP
বিস্তারিত দেখুন ডেটাশিট

MPSA92RLRP

Product Overview

Category

MPSA92RLRP belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as an amplifier or switch in electronic circuits.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise

Package

MPSA92RLRP is typically available in a TO-92 package.

Essence

The essence of MPSA92RLRP lies in its ability to amplify and control electrical signals in various electronic applications.

Packaging/Quantity

It is usually packaged in reels with a quantity of 2000 units per reel.

Specifications

  • Collector-Base Voltage (VCBO): 300V
  • Collector-Emitter Voltage (VCEO): 300V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • DC Current Gain (hFE): 100-300

Detailed Pin Configuration

MPSA92RLRP has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • Amplification of weak signals
  • Switching high-power loads
  • Low noise performance

Advantages

  • High current gain
  • Low power dissipation
  • Versatile applications

Disadvantages

  • Limited frequency response
  • Susceptible to temperature variations

Working Principles

MPSA92RLRP operates based on the principles of amplification and control of electrical currents through the manipulation of the transistor's base-emitter junction.

Detailed Application Field Plans

MPSA92RLRP finds extensive use in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to MPSA92RLRP include: - 2N4403 - BC557 - BC558

In conclusion, MPSA92RLRP is a versatile BJT that offers high current gain and low power dissipation, making it suitable for a wide range of electronic applications.

Word count: 298

প্রযুক্তিগত সমাধানে MPSA92RLRP এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the MPSA92RLRP transistor used for?

    • The MPSA92RLRP is a high voltage PNP bipolar junction transistor (BJT) commonly used in amplification and switching applications.

  2. What are the key specifications of the MPSA92RLRP transistor?

    • The MPSA92RLRP has a maximum collector-emitter voltage of 300V, a collector current of 500mA, and a power dissipation of 625mW.

  3. Can the MPSA92RLRP be used in audio amplifier circuits?

    • Yes, the MPSA92RLRP is suitable for use in audio amplifier circuits due to its high voltage capability and moderate current handling.

  4. Is the MPSA92RLRP suitable for low noise amplifier designs?

    • While the MPSA92RLRP is not specifically designed for low noise applications, it can be used in certain amplifier configurations with appropriate circuit design.

  5. What are some typical applications of the MPSA92RLRP transistor?

    • Common applications include audio amplifiers, high voltage switching circuits, and general purpose amplification.

  6. Does the MPSA92RLRP require a heat sink in high power applications?

    • In high power applications, it is recommended to use a heat sink to ensure proper thermal management and prevent overheating.

  7. Can the MPSA92RLRP be used in high frequency circuits?

    • The MPSA92RLRP is not optimized for high frequency applications due to its transition frequency characteristics, but it can be used in lower frequency circuits.

  8. What are the typical operating conditions for the MPSA92RLRP?

    • The MPSA92RLRP operates within a temperature range of -55°C to 150°C and requires a base current in the range of 50-100mA for proper saturation.

  9. Are there any common failure modes associated with the MPSA92RLRP?

    • Common failure modes include thermal runaway at high currents and voltages, as well as breakdown due to excessive power dissipation.

  10. Where can I find detailed technical information and application notes for the MPSA92RLRP?

    • Detailed technical information and application notes for the MPSA92RLRP can be found in the datasheet provided by the manufacturer or through reputable semiconductor resources.