ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
NCP1010ST130T3
বিস্তারিত দেখুন ডেটাশিট

NCP1010ST130T3

Product Overview

Category

NCP1010ST130T3 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

NCP1010ST130T3 is available in a small outline transistor (SOT) package.

Essence

The essence of NCP1010ST130T3 lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input voltage range: 4.5V - 25V
  • Output voltage: 1.3V
  • Maximum output current: 1A
  • Operating temperature range: -40°C to 85°C
  • Switching frequency: 100kHz

Detailed Pin Configuration

NCP1010ST130T3 has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for controlling output voltage
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current regulation
  6. DRAIN: High-voltage power switch output

Functional Features

  • Overload protection
  • Short-circuit protection
  • Under-voltage lockout
  • Soft-start functionality
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency leading to reduced power consumption
  • Compact size allows for space-saving designs
  • Comprehensive protection features ensure device safety
  • Wide input voltage range enables versatility in applications

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Relatively low switching frequency may not be ideal for certain designs requiring higher frequencies

Working Principles

NCP1010ST130T3 operates on the principle of pulse width modulation (PWM) to regulate the output voltage. It uses a feedback mechanism to continuously adjust the duty cycle of the switching signal, ensuring a stable and accurate output voltage.

Detailed Application Field Plans

NCP1010ST130T3 finds applications in various fields, including but not limited to: - Consumer electronics - Industrial automation - Automotive electronics - Telecommunications

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to NCP1010ST130T3 are: - NCP1010ST100T3 - NCP1010ST150T3 - NCP1010ST200T3 - NCP1010ST250T3

These models offer similar functionality with slight variations in specifications, catering to different application requirements.

Word count: 314 words

প্রযুক্তিগত সমাধানে NCP1010ST130T3 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of NCP1010ST130T3 in technical solutions:

  1. Q: What is NCP1010ST130T3? A: NCP1010ST130T3 is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the typical applications of NCP1010ST130T3? A: NCP1010ST130T3 is commonly used in offline switch mode power supplies (SMPS), LED lighting, and other low-power applications.

  3. Q: What is the input voltage range supported by NCP1010ST130T3? A: The input voltage range of NCP1010ST130T3 is typically between 85V AC and 265V AC.

  4. Q: What is the output voltage range of NCP1010ST130T3? A: The output voltage range of NCP1010ST130T3 can be adjusted based on the external components used, but it is typically between 5V and 24V.

  5. Q: What is the maximum output current that NCP1010ST130T3 can handle? A: The maximum output current of NCP1010ST130T3 depends on the design and thermal considerations, but it is generally around 100mA to 200mA.

  6. Q: Does NCP1010ST130T3 have built-in protection features? A: Yes, NCP1010ST130T3 includes various protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown.

  7. Q: Can NCP1010ST130T3 operate in a wide temperature range? A: Yes, NCP1010ST130T3 is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  8. Q: What is the typical efficiency of NCP1010ST130T3? A: The efficiency of NCP1010ST130T3 depends on the specific application and design, but it can achieve efficiencies of up to 80-90%.

  9. Q: Is NCP1010ST130T3 suitable for battery-powered applications? A: NCP1010ST130T3 is primarily designed for line-powered applications and may not be the most suitable choice for battery-powered applications due to its higher power consumption.

  10. Q: Are there any reference designs or application notes available for NCP1010ST130T3? A: Yes, the manufacturer of NCP1010ST130T3 usually provides reference designs and application notes that can help engineers in implementing the IC effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.