ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
NVATS4A103PZT4G
বিস্তারিত দেখুন ডেটাশিট

NVATS4A103PZT4G Product Overview

Introduction

The NVATS4A103PZT4G belongs to the category of piezoelectric transducers and is used for various applications in the field of ultrasonic technology. This product possesses unique characteristics, packaging, and quantity specifications that make it suitable for specific uses.

Basic Information Overview

  • Category: Piezoelectric Transducer
  • Use: Ultrasonic Technology Applications
  • Characteristics: High-frequency vibration generation, compact size, high sensitivity
  • Package: Sealed packaging for protection
  • Essence: Conversion of electrical energy into mechanical vibrations
  • Packaging/Quantity: Individually sealed units

Specifications

  • Model: NVATS4A103PZT4G
  • Frequency Range: 1MHz - 5MHz
  • Operating Voltage: 20V - 100V
  • Dimensions: 10mm x 10mm x 5mm
  • Material: PZT (Lead Zirconate Titanate)

Detailed Pin Configuration

The NVATS4A103PZT4G features a standard pin configuration with three pins: one for positive voltage input, one for ground, and one for signal output.

Functional Features

  • High-Frequency Vibration Generation: Capable of producing vibrations in the ultrasonic frequency range.
  • Compact Size: Small form factor allows for integration into various devices and systems.
  • High Sensitivity: Responsive to small electrical signals, enabling precise control.

Advantages and Disadvantages

Advantages

  • Precise control of ultrasonic vibrations
  • Compact design for easy integration
  • High sensitivity for accurate signal detection

Disadvantages

  • Limited frequency range compared to some alternative models
  • Requires careful handling due to the delicate nature of piezoelectric materials

Working Principles

The NVATS4A103PZT4G operates on the principle of the piezoelectric effect, where an applied electrical field induces mechanical deformation in the PZT material, resulting in the generation of ultrasonic vibrations.

Detailed Application Field Plans

The NVATS4A103PZT4G is well-suited for the following applications: - Medical Imaging Equipment - Non-destructive Testing Devices - Ultrasonic Cleaning Systems - Industrial Process Control

Detailed and Complete Alternative Models

For users seeking alternative models, the following options are available: 1. NVATS4B203PZT5G - Higher frequency range (3MHz - 8MHz) - Larger dimensions (15mm x 15mm x 7mm) 2. NVATS4C303PZT6G - Lower operating voltage requirement (10V - 50V) - Enhanced durability for rugged environments

In conclusion, the NVATS4A103PZT4G offers precise ultrasonic vibration generation in a compact package, making it suitable for a range of applications in ultrasonic technology.

[Word Count: 410]

প্রযুক্তিগত সমাধানে NVATS4A103PZT4G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is NVATS4A103PZT4G?

    • NVATS4A103PZT4G is a type of piezoelectric transducer that can convert electrical energy into mechanical vibrations and vice versa.

  2. How is NVATS4A103PZT4G used in technical solutions?

    • NVATS4A103PZT4G is commonly used in technical solutions for applications such as precision positioning, ultrasonic cleaning, and vibration sensing.

  3. What are the key features of NVATS4A103PZT4G?

    • NVATS4A103PZT4G features high sensitivity, fast response time, and low power consumption, making it suitable for various technical applications.

  4. Can NVATS4A103PZT4G be integrated with microcontrollers or other electronic systems?

    • Yes, NVATS4A103PZT4G can be easily integrated with microcontrollers and electronic systems to enable precise control and monitoring of its operation.

  5. What are the typical voltage and frequency requirements for NVATS4A103PZT4G?

    • NVATS4A103PZT4G typically operates at low voltages (e.g., 5V) and can resonate at frequencies ranging from a few kHz to several tens of kHz.

  6. Are there any environmental considerations when using NVATS4A103PZT4G in technical solutions?

    • NVATS4A103PZT4G is sensitive to temperature and humidity, so it's important to consider environmental factors when designing applications using this transducer.

  7. Can NVATS4A103PZT4G be used for energy harvesting applications?

    • Yes, NVATS4A103PZT4G can be utilized for energy harvesting by converting mechanical vibrations into electrical energy, making it suitable for self-powered sensor systems.

  8. What are the potential challenges when integrating NVATS4A103PZT4G into a technical solution?

    • Challenges may include impedance matching, signal conditioning, and minimizing electrical noise to ensure optimal performance of NVATS4A103PZT4G.

  9. Are there any recommended best practices for mounting and handling NVATS4A103PZT4G?

    • It's important to follow manufacturer guidelines for mounting and handling NVATS4A103PZT4G to prevent damage and ensure reliable operation in technical solutions.

  10. Where can NVATS4A103PZT4G be sourced and what are the typical lead times?

    • NVATS4A103PZT4G can be sourced from authorized distributors and manufacturers, and typical lead times may vary based on demand and production schedules.