চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
P6SMB15AT3
Product Category
The P6SMB15AT3 belongs to the category of transient voltage suppressor (TVS) diodes.
Basic Information Overview
- Use: The P6SMB15AT3 is used to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
- Characteristics: It has a low clamping voltage, fast response time, and high surge capability.
- Package: The P6SMB15AT3 is available in a DO-214AA (SMB) package.
- Essence: Its essence lies in providing robust protection against transient voltage events.
- Packaging/Quantity: It is typically packaged in reels with quantities varying based on manufacturer specifications.
Specifications
- Peak Pulse Power: 600W
- Breakdown Voltage: 16.7V to 18.5V
- Operating Temperature: -55°C to +150°C
- Polarity: Unidirectional
Detailed Pin Configuration
The P6SMB15AT3 TVS diode has two pins: anode and cathode. The anode is connected to the positive side of the circuit, while the cathode is connected to the ground or negative side of the circuit.
Functional Features
- Transient Voltage Suppression: Effectively clamps transient voltages to a safe level.
- Fast Response Time: Rapid reaction to transient events, minimizing the risk of damage to protected components.
Advantages and Disadvantages
- Advantages:
- Robust protection against transient voltage events.
- Fast response time ensures minimal impact on the protected circuit.
- Disadvantages:
- May require periodic replacement after absorbing multiple transient events.
- Can introduce some capacitance into the circuit, affecting high-frequency signals.
Working Principles
The P6SMB15AT3 operates by diverting excessive current away from sensitive components when a transient voltage event occurs. It achieves this by quickly switching into a low-impedance state, effectively shunting the excess energy to ground.
Detailed Application Field Plans
The P6SMB15AT3 is commonly used in various electronic systems, including:
- Telecommunication equipment
- Automotive electronics
- Industrial control systems
- Consumer electronics
Detailed and Complete Alternative Models
- Alternative Model 1: P6SMB10AT3
- Breakdown Voltage: 11.1V to 12.3V
- Peak Pulse Power: 600W
- Alternative Model 2: P6SMB18AT3
- Breakdown Voltage: 20.0V to 22.1V
- Peak Pulse Power: 600W
In conclusion, the P6SMB15AT3 transient voltage suppressor diode offers robust protection against transient voltage events, making it an essential component in safeguarding sensitive electronic equipment across various industries.
Word Count: 366
প্রযুক্তিগত সমাধানে P6SMB15AT3 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন
What is the maximum peak pulse power of P6SMB15AT3?
- The maximum peak pulse power of P6SMB15AT3 is 600 watts.
What is the breakdown voltage of P6SMB15AT3?
- The breakdown voltage of P6SMB15AT3 is 16.7V.
What is the typical clamping voltage of P6SMB15AT3?
- The typical clamping voltage of P6SMB15AT3 is 24.4V at 10A.
What is the operating temperature range of P6SMB15AT3?
- The operating temperature range of P6SMB15AT3 is -55°C to +150°C.
What are the typical applications for P6SMB15AT3?
- P6SMB15AT3 is commonly used in transient voltage suppression in various electronic equipment such as computers, telecommunication equipment, and consumer electronics.
What is the reverse stand-off voltage of P6SMB15AT3?
- The reverse stand-off voltage of P6SMB15AT3 is 12.8V.
Does P6SMB15AT3 meet RoHS compliance?
- Yes, P6SMB15AT3 is compliant with RoHS regulations.
What is the package type of P6SMB15AT3?
- P6SMB15AT3 comes in a DO-214AA (SMB) package.
Is P6SMB15AT3 suitable for overvoltage protection in power supply circuits?
- Yes, P6SMB15AT3 is suitable for providing overvoltage protection in power supply circuits.
What is the response time of P6SMB15AT3 during transient voltage events?
- The response time of P6SMB15AT3 is very fast, typically responding within nanoseconds to clamp transient voltages.