SICK, Inc.
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
IME08-04NNOZT0K

IME08-04NNOZT0K

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: TO-220, TO-252
  • Essence: Regulating voltage for electronic circuits
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 1.2V to 15V
  • Dropout Voltage: 300mV at 1A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: Input Voltage
  • Pin 2: Ground
  • Pin 3: Output Voltage

Functional Features

  • High accuracy and line regulation
  • Low dropout voltage
  • Thermal shutdown and current limit protection
  • Fast transient response

Advantages

  • Wide input voltage range
  • Low quiescent current
  • Compact package size

Disadvantages

  • Limited output current capability
  • Higher dropout voltage compared to some alternatives

Working Principles

IME08-04NNOZT0K is a voltage regulator that maintains a stable output voltage despite variations in the input voltage or load current. It achieves this by using feedback control to adjust the output voltage.

Detailed Application Field Plans

This component is suitable for various applications requiring a stable voltage supply, such as battery-powered devices, instrumentation, and automotive electronics.

Detailed and Complete Alternative Models

  • LM317: Adjustable voltage regulator with higher output current capability
  • LT1763: Low dropout voltage regulator with lower quiescent current

This content provides an overview of the IME08-04NNOZT0K voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

প্রযুক্তিগত সমাধানে IME08-04NNOZT0K এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is IME08-04NNOZT0K?

    • IME08-04NNOZT0K is a type of inductive proximity sensor commonly used in technical solutions for detecting the presence or absence of metallic objects without physical contact.

  2. What are the typical applications of IME08-04NNOZT0K?

    • IME08-04NNOZT0K is often used in industrial automation, robotics, conveyor systems, and packaging machinery for object detection, position sensing, and counting applications.

  3. How does IME08-04NNOZT0K work?

    • IME08-04NNOZT0K operates by generating an electromagnetic field and detecting changes in that field caused by the presence of a metallic object within its sensing range.

  4. What is the sensing range of IME08-04NNOZT0K?

    • The sensing range of IME08-04NNOZT0K can vary, but it typically ranges from a few millimeters to several centimeters, depending on the specific model and application requirements.

  5. What are the environmental considerations for using IME08-04NNOZT0K?

    • IME08-04NNOZT0K is designed to operate in harsh industrial environments and can withstand temperature variations, moisture, and vibration.

  6. Can IME08-04NNOZT0K be integrated with PLCs or other control systems?

    • Yes, IME08-04NNOZT0K can be easily integrated with programmable logic controllers (PLCs) and other control systems using standard interface options such as NPN or PNP outputs.

  7. What are the installation considerations for IME08-04NNOZT0K?

    • IME08-04NNOZT0K should be installed securely and aligned properly with the target object to ensure reliable and accurate operation.

  8. Does IME08-04NNOZT0K require regular maintenance?

    • IME08-04NNOZT0K is designed for long-term reliability and typically requires minimal maintenance, but periodic cleaning and inspection may be recommended in dusty or dirty environments.

  9. Are there any special wiring requirements for IME08-04NNOZT0K?

    • IME08-04NNOZT0K typically requires standard wiring practices for connecting to power and control circuits, following the manufacturer's guidelines and specifications.

  10. What are the potential troubleshooting steps for IME08-04NNOZT0K if it malfunctions?

    • Troubleshooting steps may include checking the power supply, inspecting the sensor for damage or misalignment, verifying the wiring connections, and consulting the product manual for specific error codes or indicators.