STMicroelectronics
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
BD140
বিস্তারিত দেখুন ডেটাশিট

BD140 Transistor

Product Overview

Category

BD140 is a PNP epitaxial silicon transistor.

Use

It is commonly used as an audio amplifier or driver in electronic circuits.

Characteristics

  • Low power loss, high current capability
  • High hFE linearity
  • Complementary to BD139

Package

BD140 transistors are typically available in TO-126 packaging.

Essence

The essence of BD140 lies in its ability to amplify and switch electronic signals with low power loss.

Packaging/Quantity

They are usually sold in reels or tubes containing multiple units.

Specifications

  • Collector-Emitter Voltage: -80V
  • Collector Current: -1.5A
  • Power Dissipation: 12.5W
  • DC Current Gain (hFE): 40 - 250
  • Transition Frequency: 30MHz

Detailed Pin Configuration

  1. Base (B)
  2. Collector (C)
  3. Emitter (E)

Functional Features

  • High current gain
  • Low saturation voltage
  • Good linearity of hFE

Advantages

  • Low power loss
  • High current capability
  • Complementary to BD139

Disadvantages

  • Limited frequency response compared to other transistors
  • Relatively low transition frequency

Working Principles

BD140 operates based on the movement of charge carriers within the semiconductor material, allowing it to control the flow of current between its terminals.

Detailed Application Field Plans

BD140 transistors find applications in: - Audio amplifiers - Driver circuits - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to BD140 include: - 2N3906 - BC557 - TIP32

In conclusion, the BD140 transistor is a versatile component widely used in audio amplification and signal switching applications due to its low power loss and high current capability. While it has limitations in terms of frequency response and transition frequency, it remains a popular choice for various electronic circuit designs.

[Word count: 274]

প্রযুক্তিগত সমাধানে BD140 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the BD140 transistor used for?

    • The BD140 is a PNP power transistor commonly used in audio amplifiers and other high-power applications.

  2. What are the typical operating conditions for the BD140?

    • The BD140 is typically operated at a collector current of 1.5A and a collector-emitter voltage of 80V.

  3. How do I connect the BD140 in a circuit?

    • The BD140 can be connected in various configurations depending on the specific application, but it is commonly used as a switch or amplifier in electronic circuits.

  4. What are the key characteristics of the BD140?

    • The BD140 has a high current gain, low saturation voltage, and high transition frequency, making it suitable for power amplifier and switching applications.

  5. Can the BD140 be used in audio amplifier circuits?

    • Yes, the BD140 is commonly used in audio amplifier circuits due to its high power handling capabilities and low distortion.

  6. What are the typical thermal considerations for the BD140?

    • Proper heat sinking is important when using the BD140 in high-power applications to ensure that it operates within its safe temperature range.

  7. Are there any common failure modes for the BD140?

    • Common failure modes for the BD140 include overheating due to inadequate heat sinking or excessive current and voltage stress.

  8. Can the BD140 be used in motor control applications?

    • Yes, the BD140 can be used in motor control circuits to drive and control the speed of DC motors.

  9. What are the recommended biasing arrangements for the BD140?

    • The BD140 can be biased using fixed or adjustable biasing arrangements to ensure proper operating conditions in the circuit.

  10. Where can I find detailed datasheets and application notes for the BD140?

    • Detailed datasheets and application notes for the BD140 can be found on semiconductor manufacturer websites or electronics component distributors.