চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
SN74AS533ADWRG4

SN74AS533ADWRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Translator
  • Characteristics: High-speed, Non-Inverting, Octal D-Type Flip-Flop with 3-State Outputs
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The SN74AS533ADWRG4 is a logic level translator IC that provides non-inverting octal D-type flip-flops with 3-state outputs. It is designed to facilitate communication between devices operating at different voltage levels.
  • Packaging/Quantity: The SN74AS533ADWRG4 is available in a reel packaging with 2500 units per reel.

Specifications

  • Logic Family: AS
  • Number of Bits: 8
  • Input Voltage Range: 2V to 6V
  • Output Voltage Range: 2V to 6V
  • Propagation Delay Time: 9 ns (typical)
  • Operating Temperature Range: -40°C to 85°C
  • Supply Voltage: 4.5V to 5.5V

Detailed Pin Configuration

The SN74AS533ADWRG4 has a total of 20 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. CP (Clock Pulse)
  12. Q0 (Flip-Flop Output 0)
  13. Q1 (Flip-Flop Output 1)
  14. Q2 (Flip-Flop Output 2)
  15. Q3 (Flip-Flop Output 3)
  16. Q4 (Flip-Flop Output 4)
  17. Q5 (Flip-Flop Output 5)
  18. Q6 (Flip-Flop Output 6)
  19. Q7 (Flip-Flop Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • Non-inverting octal D-type flip-flops with 3-state outputs
  • High-speed operation
  • Wide input and output voltage range
  • 3-state outputs allow multiple devices to share a common bus

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - Wide input and output voltage range allows compatibility with various devices - 3-state outputs facilitate bus sharing among multiple devices

Disadvantages: - Limited number of bits (8) may not be suitable for applications requiring larger data processing capabilities - Requires external clock pulse for proper operation

Working Principles

The SN74AS533ADWRG4 operates by receiving data inputs (D0-D7) and clock pulses (CP). The data inputs are latched into the flip-flops on the rising edge of the clock pulse. The stored data can then be accessed through the corresponding flip-flop outputs (Q0-Q7). The output enable (OE) pin controls the 3-state outputs, allowing them to be either active or in a high-impedance state.

Detailed Application Field Plans

The SN74AS533ADWRG4 is commonly used in applications where logic level translation is required. Some specific application fields include:

  1. Microcontroller interfacing with different voltage peripherals
  2. Communication between devices operating at different voltage levels
  3. Data transmission in industrial automation systems
  4. Interface between digital signal processors and memory devices

Detailed and Complete Alternative Models

  1. SN74AS533AN: DIP (Dual Inline Package) version of the SN74AS533ADWRG4
  2. SN74LS533: Low-power Schottky version with similar functionality
  3. SN74HC533: High-speed CMOS version with similar functionality
  4. SN74LVC533A: Low-voltage CMOS version with similar functionality

These alternative models offer similar features and can be used as substitutes for the SN74AS533ADWRG4 depending on specific requirements.

Word count: 529 words

প্রযুক্তিগত সমাধানে SN74AS533ADWRG4 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of SN74AS533ADWRG4 in technical solutions:

  1. Q: What is SN74AS533ADWRG4? A: SN74AS533ADWRG4 is a type of octal transparent latch with 3-state outputs, commonly used in digital systems.

  2. Q: What is the purpose of SN74AS533ADWRG4? A: SN74AS533ADWRG4 is used to store and control the flow of data in digital circuits.

  3. Q: How many bits can SN74AS533ADWRG4 handle? A: SN74AS533ADWRG4 can handle 8 bits of data.

  4. Q: What is the voltage range supported by SN74AS533ADWRG4? A: SN74AS533ADWRG4 supports a voltage range of 2V to 6V.

  5. Q: Can SN74AS533ADWRG4 be used in both parallel and serial data transfer? A: No, SN74AS533ADWRG4 is primarily used for parallel data transfer.

  6. Q: What is the maximum operating frequency of SN74AS533ADWRG4? A: The maximum operating frequency of SN74AS533ADWRG4 is typically around 100 MHz.

  7. Q: Does SN74AS533ADWRG4 have any built-in protection features? A: Yes, SN74AS533ADWRG4 has built-in diode clamps to protect against electrostatic discharge (ESD).

  8. Q: Can SN74AS533ADWRG4 be cascaded to handle more than 8 bits of data? A: Yes, multiple SN74AS533ADWRG4 chips can be cascaded to handle larger data sizes.

  9. Q: What is the power supply voltage required for SN74AS533ADWRG4? A: SN74AS533ADWRG4 requires a power supply voltage of 5V.

  10. Q: Can SN74AS533ADWRG4 be used in both commercial and industrial applications? A: Yes, SN74AS533ADWRG4 is suitable for use in both commercial and industrial applications due to its wide operating temperature range.

Please note that these answers are general and may vary depending on specific application requirements.