The TPS92610QPWPRQ1 belongs to the category of integrated circuits (ICs) specifically designed for automotive lighting applications.
This product is primarily used for controlling and driving high-power LEDs in automotive lighting systems. It provides efficient and reliable LED current regulation, ensuring optimal performance and longevity of the lighting system.
The TPS92610QPWPRQ1 is packaged in a PowerPAD™ thermally enhanced package, which facilitates effective heat dissipation. It is supplied in reels, with a quantity of 2500 units per reel.
The TPS92610QPWPRQ1 has the following pin configuration:
```
| | | TPS92610QPWPRQ1 | |_______________________________________| | | | Pin 1: VIN | | Pin 2: GND | | Pin 3: VOUT | | Pin 4: DIM | | Pin 5: EN | | Pin 6: FAULT | | Pin 7: ISET | | Pin 8: VREF | |_______________________________________| ```
The TPS92610QPWPRQ1 operates by regulating the current flowing through the connected LEDs. It utilizes a feedback mechanism to monitor and adjust the LED current based on the desired brightness level set by the dimming control input. The IC continuously compares the actual LED current with the reference value and adjusts the drive voltage accordingly to maintain the desired current flow.
The TPS92610QPWPRQ1 is widely used in various automotive lighting applications, including:
These alternative models offer similar functionality and characteristics, providing flexibility in selecting the most suitable IC for specific automotive lighting applications.
Word count: 609 words
Sure! Here are 10 common questions and answers related to the application of TPS92610QPWPRQ1 in technical solutions:
1. What is the TPS92610QPWPRQ1? - The TPS92610QPWPRQ1 is a high-performance automotive LED driver designed for driving single or multiple LEDs in series.
2. What is the input voltage range of the TPS92610QPWPRQ1? - The input voltage range of the TPS92610QPWPRQ1 is from 4.5V to 65V.
3. How many LEDs can the TPS92610QPWPRQ1 drive? - The TPS92610QPWPRQ1 can drive up to 16 LEDs in series.
4. What is the maximum output current of the TPS92610QPWPRQ1? - The maximum output current of the TPS92610QPWPRQ1 is 150mA.
5. Can the TPS92610QPWPRQ1 be used for both low-side and high-side LED driving? - Yes, the TPS92610QPWPRQ1 can be used for both low-side and high-side LED driving.
6. Does the TPS92610QPWPRQ1 support PWM dimming? - Yes, the TPS92610QPWPRQ1 supports PWM dimming with a frequency range of 100Hz to 20kHz.
7. Is the TPS92610QPWPRQ1 suitable for automotive applications? - Yes, the TPS92610QPWPRQ1 is specifically designed for automotive applications and meets the AEC-Q100 Grade 1 automotive qualification.
8. What protection features does the TPS92610QPWPRQ1 have? - The TPS92610QPWPRQ1 has various protection features including overvoltage protection, undervoltage lockout, thermal shutdown, and LED open/short detection.
9. Can the TPS92610QPWPRQ1 be used in conjunction with a microcontroller? - Yes, the TPS92610QPWPRQ1 can be easily controlled by a microcontroller using its enable pin and PWM dimming input.
10. What is the package type of the TPS92610QPWPRQ1? - The TPS92610QPWPRQ1 is available in a 20-pin HTSSOP package.
Please note that these answers are general and may vary depending on the specific application and requirements.