XC6108C19CGR-G
Product Overview
Category
XC6108C19CGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6108C19CGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
Package
XC6108C19CGR-G is available in a compact surface-mount package.
Essence
The essence of XC6108C19CGR-G lies in its ability to maintain a constant voltage level, ensuring reliable operation of electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tubes, with varying quantities depending on the manufacturer's specifications.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 1.9V
- Maximum output current: 150mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6108C19CGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: Maintains a stable output voltage regardless of input variations.
- Low dropout voltage: Operates efficiently even with small voltage differences between input and output.
- Low quiescent current: Consumes minimal current when no load is connected.
- Thermal shutdown protection: Prevents damage from excessive heat by shutting down the regulator.
Advantages and Disadvantages
Advantages
- Provides stable voltage output.
- Suitable for low-power applications.
- Compact package size.
- Efficient operation with low dropout voltage.
Disadvantages
- Limited maximum output current.
- Narrow input voltage range.
Working Principles
XC6108C19CGR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage level.
Detailed Application Field Plans
XC6108C19CGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C19CGR-G are: - LM1117-1.8V - MCP1700-1902E/TO - LP2985-1.9
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 346 words
প্রযুক্তিগত সমাধানে XC6108C19CGR-G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন
Sure! Here are 10 common questions and answers related to the application of XC6108C19CGR-G in technical solutions:
Q: What is XC6108C19CGR-G? A: XC6108C19CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6108C19CGR-G? A: The operating voltage range of XC6108C19CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C19CGR-G work? A: XC6108C19CGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.
Q: What is the output type of XC6108C19CGR-G? A: XC6108C19CGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Q: What is the typical quiescent current of XC6108C19CGR-G? A: The typical quiescent current of XC6108C19CGR-G is around 1.0µA, making it suitable for low-power applications.
Q: Can XC6108C19CGR-G be used in battery-powered devices? A: Yes, XC6108C19CGR-G is designed to operate efficiently in battery-powered devices due to its low quiescent current.
Q: Does XC6108C19CGR-G have built-in hysteresis? A: Yes, XC6108C19CGR-G has built-in hysteresis, which helps prevent oscillation and ensures stable voltage monitoring.
Q: What is the temperature range for XC6108C19CGR-G? A: XC6108C19CGR-G can operate within a temperature range of -40°C to +85°C, making it suitable for various environments.
Q: Can XC6108C19CGR-G be used in automotive applications? A: Yes, XC6108C19CGR-G is automotive-grade and can be used in automotive applications that require reliable voltage monitoring.
Q: Are there any recommended external components for using XC6108C19CGR-G? A: XC6108C19CGR-G requires minimal external components, typically only a few capacitors for stability and noise filtering.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.