Torex Semiconductor Ltd
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
XC6108N12CGR-G
বিস্তারিত দেখুন ডেটাশিট

XC6108N12CGR-G

Product Overview

Category

XC6108N12CGR-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Power management functionality
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6108N12CGR-G is available in a small form factor package, suitable for surface mount technology (SMT) applications.

Essence

The essence of XC6108N12CGR-G lies in its ability to regulate voltage and manage power efficiently in electronic circuits.

Packaging/Quantity

XC6108N12CGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.2V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N12CGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N12CGR-G ensures a stable output voltage of 1.2V regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Overcurrent protection: The device incorporates overcurrent protection to safeguard connected circuits from excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency results in minimal power loss during voltage regulation.
  • Low quiescent current ensures minimal power consumption when the device is idle.

Disadvantages

  • Limited maximum output current of 100mA may not be suitable for high-power applications.
  • Dropout voltage of 200mV may cause a slight voltage drop across the device.

Working Principles

XC6108N12CGR-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage of 1.2V. It employs feedback mechanisms to continuously monitor and adjust the output voltage, ensuring it remains within the specified range.

Detailed Application Field Plans

XC6108N12CGR-G finds application in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT (Internet of Things) devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N12CGR-G are: - XC6206P122MR-G - MCP1700-1202E/TO - LM1117IMPX-1.2/NOPB - TPS79328DBVR

These models offer similar voltage regulation and power management capabilities, catering to different design requirements.

Word count: 346 words

প্রযুক্তিগত সমাধানে XC6108N12CGR-G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of XC6108N12CGR-G in technical solutions:

  1. Question: What is XC6108N12CGR-G?
    - Answer: XC6108N12CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108N12CGR-G?
    - Answer: The operating voltage range of XC6108N12CGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108N12CGR-G help in technical solutions?
    - Answer: XC6108N12CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: Can XC6108N12CGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108N12CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  5. Question: What is the output type of XC6108N12CGR-G?
    - Answer: XC6108N12CGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  6. Question: What is the typical reset threshold voltage of XC6108N12CGR-G?
    - Answer: The typical reset threshold voltage of XC6108N12CGR-G is 1.2V.

  7. Question: Can XC6108N12CGR-G be used in automotive applications?
    - Answer: Yes, XC6108N12CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Does XC6108N12CGR-G have a built-in delay circuit?
    - Answer: Yes, XC6108N12CGR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specified time after the power supply voltage rises above the threshold.

  9. Question: What is the package type of XC6108N12CGR-G?
    - Answer: XC6108N12CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.

  10. Question: Is XC6108N12CGR-G RoHS compliant?
    - Answer: Yes, XC6108N12CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N12CGR-G.