চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
XC6108N28CGR-G

XC6108N28CGR-G

Product Overview

Category

XC6108N28CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6108N28CGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down the regulator in case of excessive temperature.

Package

XC6108N28CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108N28CGR-G lies in its ability to provide reliable and stable voltage regulation for electronic circuits.

Packaging/Quantity

XC6108N28CGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 2.8V
  • Output current: Up to 150mA
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30μA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108N28CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N28CGR-G maintains a constant output voltage regardless of variations in the input voltage.
  • Overcurrent protection: It limits the current flow to protect the circuit from damage.
  • Thermal shutdown protection: It shuts down the regulator if the temperature exceeds a safe threshold.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power in standby mode, prolonging battery life.

Advantages and Disadvantages

Advantages

  • Stable output voltage regulation
  • Low dropout voltage ensures efficient operation
  • Overcurrent and thermal shutdown protection enhance circuit safety
  • Low quiescent current minimizes power consumption

Disadvantages

  • Limited output current capacity (up to 150mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6108N28CGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage. The overcurrent and thermal shutdown protection mechanisms ensure the safety of the circuit and prevent damage due to excessive current or temperature.

Detailed Application Field Plans

XC6108N28CGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108N28CGR-G include: - XC6208N28CMR-G - XC6220N28AMR-G - XC6808N28AMR-G - XC6218N28AMR-G

These models provide comparable voltage regulation and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 470 words

প্রযুক্তিগত সমাধানে XC6108N28CGR-G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of XC6108N28CGR-G in technical solutions:

  1. Q: What is XC6108N28CGR-G? A: XC6108N28CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6108N28CGR-G? A: The operating voltage range of XC6108N28CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N28CGR-G help in technical solutions? A: XC6108N28CGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to unstable power supply voltages.

  4. Q: Can XC6108N28CGR-G be used in battery-powered applications? A: Yes, XC6108N28CGR-G can be used in battery-powered applications as it has low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6108N28CGR-G? A: XC6108N28CGR-G has an open-drain output type, which allows flexibility in connecting external components.

  6. Q: What is the typical reset threshold voltage of XC6108N28CGR-G? A: The typical reset threshold voltage of XC6108N28CGR-G is 2.8V.

  7. Q: Does XC6108N28CGR-G have a built-in delay time for the reset signal? A: Yes, XC6108N28CGR-G has a built-in delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Can XC6108N28CGR-G be used in automotive applications? A: Yes, XC6108N28CGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  9. Q: What is the package type of XC6108N28CGR-G? A: XC6108N28CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.

  10. Q: Is XC6108N28CGR-G RoHS compliant? A: Yes, XC6108N28CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N28CGR-G.