Torex Semiconductor Ltd
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
XC6120C232HR-G
বিস্তারিত দেখুন ডেটাশিট

XC6120C232HR-G

Product Overview

Category

XC6120C232HR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6120C232HR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6120C232HR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6120C232HR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6120C232HR-G ensures a stable output voltage within the specified range, regardless of input voltage fluctuations.
  • Overcurrent protection: This IC incorporates overcurrent protection to safeguard connected devices from excessive current flow.
  • Thermal shutdown: In case of excessive temperature rise, the device automatically shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption during standby or idle mode.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High efficiency results in reduced power loss and extended battery life.
  • Wide input voltage range provides flexibility in different applications.
  • Overcurrent protection enhances the safety of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop, affecting sensitive components.

Working Principles

XC6120C232HR-G utilizes a feedback control mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6120C232HR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6120C232HR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models have comparable specifications and can be considered as alternatives based on specific requirements.

Word count: 410 words

প্রযুক্তিগত সমাধানে XC6120C232HR-G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of XC6120C232HR-G in technical solutions:

  1. Q: What is XC6120C232HR-G? A: XC6120C232HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6120C232HR-G? A: The operating voltage range of XC6120C232HR-G is from 0.8V to 6.0V.

  3. Q: How does XC6120C232HR-G work? A: XC6120C232HR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the threshold voltage, it triggers an output signal.

  4. Q: What is the output type of XC6120C232HR-G? A: XC6120C232HR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current consumption of XC6120C232HR-G? A: The typical quiescent current consumption of XC6120C232HR-G is around 1.0µA.

  6. Q: Can XC6120C232HR-G be used for overvoltage protection? A: No, XC6120C232HR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Q: What is the typical reset delay time of XC6120C232HR-G? A: The typical reset delay time of XC6120C232HR-G is approximately 200ms.

  8. Q: Can XC6120C232HR-G be used in automotive applications? A: Yes, XC6120C232HR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the temperature range of XC6120C232HR-G? A: The temperature range of XC6120C232HR-G is from -40°C to +85°C.

  10. Q: Is XC6120C232HR-G available in different package options? A: Yes, XC6120C232HR-G is available in a SOT-23-5 package, which is a small surface-mount package commonly used in electronic devices.

Please note that these answers are based on general information and may vary depending on specific datasheet specifications or application requirements.