Torex Semiconductor Ltd
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
XC6124E750ER-G
বিস্তারিত দেখুন ডেটাশিট

XC6124E750ER-G

Product Overview

Category

XC6124E750ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6124E750ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124E750ER-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6124E750ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E750ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • High Precision Voltage Regulation: XC6124E750ER-G ensures accurate and stable output voltage.
  • Low Dropout Voltage: It exhibits minimal voltage drop between input and output.
  • Low Quiescent Current: The regulator consumes very low current when no load is connected.
  • Thermal Shutdown Protection: It automatically shuts down to prevent damage from excessive heat.
  • Short Circuit Protection: XC6124E750ER-G safeguards against short circuits, preventing damage to the circuit.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage minimizes power loss.
  • Low quiescent current prolongs battery life.
  • Thermal shutdown protection prevents overheating.
  • Short circuit protection safeguards the circuit.

Disadvantages

  • Limited output current capacity (150mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6124E750ER-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the feedback loop to maintain a stable output voltage, compensating for any fluctuations in the input voltage or load conditions.

Detailed Application Field Plans

XC6124E750ER-G finds applications in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Digital cameras 4. Wearable devices 5. IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E750ER-G are: 1. LM1117-3.3 2. MCP1700-3302E/TO 3. TS2937CP-3.3 4. LP2985-33DBVR 5. AP2112K-3.3TRG1

These models offer similar voltage regulation capabilities and can be used as substitutes based on specific requirements.

Word count: 410 words

প্রযুক্তিগত সমাধানে XC6124E750ER-G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of XC6124E750ER-G in technical solutions:

  1. Question: What is XC6124E750ER-G?
    Answer: XC6124E750ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124E750ER-G?
    Answer: The operating voltage range of XC6124E750ER-G is from 0.8V to 6.0V.

  3. Question: How does XC6124E750ER-G work?
    Answer: XC6124E750ER-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage falls below the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6124E750ER-G?
    Answer: XC6124E750ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6124E750ER-G?
    Answer: The typical quiescent current consumption of XC6124E750ER-G is very low, around 1.0µA.

  6. Question: Can XC6124E750ER-G be used in battery-powered applications?
    Answer: Yes, XC6124E750ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: What is the accuracy of the voltage detection threshold in XC6124E750ER-G?
    Answer: The accuracy of the voltage detection threshold in XC6124E750ER-G is ±1.5%.

  8. Question: Can XC6124E750ER-G be used in automotive applications?
    Answer: Yes, XC6124E750ER-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: Does XC6124E750ER-G have built-in hysteresis?
    Answer: Yes, XC6124E750ER-G has built-in hysteresis, which helps to prevent output oscillation near the detection threshold.

  10. Question: What is the package type of XC6124E750ER-G?
    Answer: XC6124E750ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are based on general information about XC6124E750ER-G. For specific technical details and application requirements, it is recommended to refer to the datasheet provided by Torex Semiconductor or consult with their technical support team.