Vishay Semiconductor Diodes Division
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
GBU6JL-7001E3/45

GBU6JL-7001E3/45

Product Overview

Category: Rectifier Diode
Use: Convert AC to DC in power supply applications
Characteristics: High current capability, low forward voltage drop, rugged construction
Package: Through-hole, 4-pin, single-in-line package (SIP)
Essence: Efficiently converts alternating current (AC) to direct current (DC)
Packaging/Quantity: Typically packaged in reels of 1000 units

Specifications

  • Maximum Average Forward Current: 6A
  • Peak Repetitive Reverse Voltage: 1000V
  • Forward Voltage Drop: 1.1V at 6A
  • Operating Temperature Range: -65°C to +175°C
  • Reverse Leakage Current: 10μA at 1000V

Detailed Pin Configuration

  1. Anode
  2. Cathode
  3. Not connected
  4. Cathode

Functional Features

  • High current carrying capability
  • Low reverse leakage current
  • Fast switching speed
  • Rugged construction for reliability

Advantages and Disadvantages

Advantages: - High current capability - Low forward voltage drop - Rugged construction for durability

Disadvantages: - Relatively high reverse recovery time

Working Principles

The GBU6JL-7001E3/45 rectifier diode operates by allowing current to flow in one direction while blocking it in the opposite direction. When an AC signal is applied, the diode conducts during the positive half-cycle, allowing current to flow through the load. During the negative half-cycle, the diode blocks the current flow.

Detailed Application Field Plans

The GBU6JL-7001E3/45 is commonly used in: - Power supplies - Motor drives - Welding equipment - Battery chargers - UPS systems

Detailed and Complete Alternative Models

  • GBU6JL-7002E3/45
  • GBU6JL-7004E3/45
  • GBU6JL-7010E3/45

This comprehensive entry provides a detailed overview of the GBU6JL-7001E3/45 rectifier diode, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

প্রযুক্তিগত সমাধানে GBU6JL-7001E3/45 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the GBU6JL-7001E3/45?

    • The GBU6JL-7001E3/45 is a bridge rectifier diode commonly used in AC to DC conversion circuits.

  2. What are the electrical specifications of GBU6JL-7001E3/45?

    • The GBU6JL-7001E3/45 has a maximum average forward rectified current of 6A and a peak repetitive reverse voltage of 1000V.

  3. How is GBU6JL-7001E3/45 typically used in technical solutions?

    • It is commonly used in power supplies, battery chargers, and other applications where AC needs to be converted to DC.

  4. What are the key features of GBU6JL-7001E3/45?

    • Some key features include high surge current capability, low forward voltage drop, and high isolation voltage.

  5. What are the temperature specifications for GBU6JL-7001E3/45?

    • The GBU6JL-7001E3/45 has an operating temperature range of -55°C to +150°C.

  6. Are there any recommended application circuits for GBU6JL-7001E3/45?

    • Yes, typical application circuits can be found in the datasheet provided by the manufacturer.

  7. What are the common failure modes of GBU6JL-7001E3/45?

    • Common failure modes include overcurrent damage, thermal stress, and voltage spikes.

  8. Can GBU6JL-7001E3/45 be used in automotive applications?

    • Yes, it can be used in automotive systems, but it's important to ensure that it meets the specific requirements for automotive use.

  9. What are the packaging options available for GBU6JL-7001E3/45?

    • The GBU6JL-7001E3/45 is available in standard through-hole and surface mount packages.

  10. Where can I find more detailed information about GBU6JL-7001E3/45?

    • Detailed technical information can be found in the datasheet provided by the manufacturer or by contacting their technical support team.