Vishay Semiconductor Diodes Division
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MBRB2060CTHE3_A/P
বিস্তারিত দেখুন ডেটাশিট

MBRB2060CTHE3_A/P

Product Overview

Category

The MBRB2060CTHE3_A/P belongs to the category of Schottky Barrier Rectifiers.

Use

It is commonly used in power supply applications, voltage clamping, and reverse polarity protection.

Characteristics

  • High efficiency due to low forward voltage drop
  • Fast switching speed
  • Low power loss
  • High surge capability

Package

The MBRB2060CTHE3_A/P is typically available in a TO-263AB package.

Essence

This rectifier is essential for converting alternating current (AC) to direct current (DC) with minimal power loss.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Average Forward Current: 20A
  • Reverse Voltage: 60V
  • Forward Voltage Drop: 0.65V at 10A
  • Operating Temperature Range: -65°C to 175°C
  • Storage Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The MBRB2060CTHE3_A/P typically has three pins: 1. Anode 2. Cathode 3. Gate (for some models)

Functional Features

  • Low forward voltage drop for improved efficiency
  • Fast switching speed for rapid response in power supply applications
  • High surge capability for reliable performance under transient conditions

Advantages and Disadvantages

Advantages

  • High efficiency
  • Fast switching speed
  • Low power loss

Disadvantages

  • Limited reverse voltage compared to other rectifiers in the market
  • Sensitive to temperature variations

Working Principles

The MBRB2060CTHE3_A/P operates based on the Schottky barrier principle, where a metal-semiconductor junction forms a low forward voltage drop and fast switching characteristics.

Detailed Application Field Plans

Power Supply Applications

The rectifier can be used in various power supply designs, including switch-mode power supplies and DC-DC converters.

Voltage Clamping

It is effective in protecting sensitive electronic components from overvoltage conditions by clamping the voltage at a safe level.

Reverse Polarity Protection

In circuits where reverse polarity can occur, the rectifier prevents damage by blocking the reverse current flow.

Detailed and Complete Alternative Models

  • MBRB2045CTHE3_A/P
  • MBRB20100CTHE3_A/P
  • MBRB2020CTHE3_A/P

In conclusion, the MBRB2060CTHE3_A/P is a high-efficiency Schottky Barrier Rectifier suitable for various power supply and voltage clamping applications. Its fast switching speed and low power loss make it a preferred choice in the industry, although its limited reverse voltage and sensitivity to temperature variations should be considered when selecting alternative models.

[Word Count: 442]

প্রযুক্তিগত সমাধানে MBRB2060CTHE3_A/P এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is MBRB2060CTHE3_A/P?

    • MBRB2060CTHE3_A/P is a Schottky diode rectifier designed for high efficiency and low power loss in applications such as switch mode power supplies and freewheeling diodes.

  2. What are the key features of MBRB2060CTHE3_A/P?

    • The key features include a low forward voltage drop, high current capability, high surge capacity, and a small form factor.

  3. What are the typical applications of MBRB2060CTHE3_A/P?

    • Typical applications include DC-DC converters, reverse polarity protection, freewheeling diodes, and OR-ing diodes in power supplies.

  4. What is the maximum forward voltage of MBRB2060CTHE3_A/P?

    • The maximum forward voltage is typically around 0.65V at a forward current of 10A.

  5. What is the maximum reverse voltage of MBRB2060CTHE3_A/P?

    • The maximum reverse voltage is 60V.

  6. What is the operating temperature range of MBRB2060CTHE3_A/P?

    • The operating temperature range is typically -55°C to 175°C.

  7. What are the thermal characteristics of MBRB2060CTHE3_A/P?

    • The device has a low thermal resistance and is designed to efficiently dissipate heat.

  8. What are the packaging options available for MBRB2060CTHE3_A/P?

    • The device is available in a variety of surface mount packages, such as DPAK and TO-263.

  9. What are the recommended storage conditions for MBRB2060CTHE3_A/P?

    • It is recommended to store the device in a dry environment at temperatures between -55°C and 175°C.

  10. Where can I find detailed technical specifications and application notes for MBRB2060CTHE3_A/P?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer.