Vishay Semiconductor Diodes Division
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
VLZ10A-GS18
বিস্তারিত দেখুন ডেটাশিট

VLZ10A-GS18 Product Overview

Introduction

The VLZ10A-GS18 is a semiconductor product belonging to the category of voltage regulators. This device is commonly used in electronic circuits to maintain a stable output voltage, ensuring reliable performance of various electronic components.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To maintain a stable output voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-252-3 (DPAK)
  • Essence: Ensures stable and reliable power supply for electronic devices
  • Packaging/Quantity: Typically packaged in reels of 2500 units

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Output Current: 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VLZ10A-GS18 features a standard TO-252-3 (DPAK) package with three pins: 1. Pin 1: Input Voltage (VIN) 2. Pin 2: Ground (GND) 3. Pin 3: Output Voltage (VOUT)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Ensures efficient operation even when the input voltage is close to the output voltage
  • Thermal Shutdown Protection: Safeguards the device from overheating, enhancing reliability

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low dropout voltage
  • Thermal protection for enhanced reliability

Disadvantages

  • Higher cost compared to basic linear regulators
  • Sensitive to external noise and fluctuations

Working Principles

The VLZ10A-GS18 utilizes a combination of internal circuitry and feedback mechanisms to compare the output voltage to a reference voltage, adjusting the output as necessary to maintain a stable voltage level.

Detailed Application Field Plans

This voltage regulator is widely used in various electronic devices and systems, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • LM1117-3.3
  • L78M33CDT
  • NCV4274

In conclusion, the VLZ10A-GS18 voltage regulator offers precise and reliable voltage regulation, making it an essential component in numerous electronic applications.

[Word Count: 366]

প্রযুক্তিগত সমাধানে VLZ10A-GS18 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure, here are 10 common questions and answers related to the application of VLZ10A-GS18 in technical solutions:

  1. Question: What is the operating voltage range for VLZ10A-GS18?
    Answer: The operating voltage range for VLZ10A-GS18 is typically between 3V and 5.5V.

  2. Question: What is the maximum output current of VLZ10A-GS18?
    Answer: The maximum output current of VLZ10A-GS18 is 1A.

  3. Question: Can VLZ10A-GS18 be used in automotive applications?
    Answer: Yes, VLZ10A-GS18 is suitable for automotive applications due to its wide operating temperature range and robust design.

  4. Question: What is the typical efficiency of VLZ10A-GS18?
    Answer: The typical efficiency of VLZ10A-GS18 is around 90% under normal operating conditions.

  5. Question: Is VLZ10A-GS18 suitable for battery-powered devices?
    Answer: Yes, VLZ10A-GS18 is well-suited for battery-powered devices due to its low quiescent current and high efficiency.

  6. Question: Does VLZ10A-GS18 have built-in overcurrent protection?
    Answer: Yes, VLZ10A-GS18 features built-in overcurrent protection to safeguard the device and the connected load.

  7. Question: What type of package does VLZ10A-GS18 come in?
    Answer: VLZ10A-GS18 is available in a compact and thermally efficient WSON-6 package.

  8. Question: Can VLZ10A-GS18 be used in industrial control systems?
    Answer: Yes, VLZ10A-GS18 is suitable for industrial control systems due to its wide input voltage range and rugged construction.

  9. Question: What is the typical startup time for VLZ10A-GS18?
    Answer: The typical startup time for VLZ10A-GS18 is less than 100µs, making it ideal for quick power-up requirements.

  10. Question: Does VLZ10A-GS18 require external compensation components?
    Answer: No, VLZ10A-GS18 features internal compensation, eliminating the need for external compensation components and simplifying the design process.