চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
SI7392DP-T1-E3

SI7392DP-T1-E3

Product Overview

Category

The SI7392DP-T1-E3 belongs to the category of power management integrated circuits (PMICs).

Use

It is used for voltage regulation and power management in various electronic devices and systems.

Characteristics

  • High efficiency
  • Wide input voltage range
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

The SI7392DP-T1-E3 is available in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of this product lies in its ability to efficiently regulate and manage power in electronic systems, ensuring stable and reliable operation.

Packaging/Quantity

The SI7392DP-T1-E3 is typically packaged in reels and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 3A
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The detailed pin configuration of the SI7392DP-T1-E3 is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. FB (Feedback) 5. SS (Soft Start) 6. COMP (Compensation) 7. PG (Power Good) 8. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range for versatile applications
  • Adjustable output voltage for flexibility
  • Soft start function for controlled startup
  • Power good indicator for system monitoring
  • Overcurrent and thermal shutdown protection for enhanced safety

Advantages and Disadvantages

Advantages

  • High efficiency contributes to energy savings
  • Wide input voltage range allows for compatibility with various power sources
  • Overcurrent and thermal shutdown protection enhance system reliability

Disadvantages

  • May require external components for specific applications
  • Limited maximum output current compared to some alternative models

Working Principles

The SI7392DP-T1-E3 operates based on pulse-width modulation (PWM) control to regulate the output voltage. When enabled, it adjusts the duty cycle of the internal switch to maintain the desired output voltage, while incorporating various protection features to ensure safe and reliable operation.

Detailed Application Field Plans

The SI7392DP-T1-E3 is suitable for a wide range of applications, including but not limited to: - Industrial power supplies - Automotive electronics - Telecommunications equipment - LED lighting systems - Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models to the SI7392DP-T1-E3 include: - SI7391DP-T1-E3 - SI7393DP-T1-E3 - LT8610X

In conclusion, the SI7392DP-T1-E3 is a versatile and efficient PMIC that offers a wide input voltage range, adjustable output voltage, and essential protection features. Its application spans across various industries, making it a valuable component in modern electronic systems.

Word Count: 411

প্রযুক্তিগত সমাধানে SI7392DP-T1-E3 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the SI7392DP-T1-E3?

    • The SI7392DP-T1-E3 is a dual N-channel 30 V (D-S) MOSFET in a PowerPAK® SO-8 package, designed for use in a wide range of applications.
  2. What are the key features of the SI7392DP-T1-E3?

    • The key features include low on-resistance, fast switching speed, low gate charge, and a small package size, making it suitable for high-efficiency power management solutions.
  3. What are the typical applications for the SI7392DP-T1-E3?

    • Typical applications include power supplies, DC-DC converters, motor control, load switches, and battery management systems.
  4. What is the maximum drain-source voltage of the SI7392DP-T1-E3?

    • The maximum drain-source voltage is 30 V, making it suitable for various low-voltage applications.
  5. What is the maximum continuous drain current of the SI7392DP-T1-E3?

    • The maximum continuous drain current is 10 A, allowing for high-power handling capabilities.
  6. What is the typical on-resistance of the SI7392DP-T1-E3?

    • The typical on-resistance is very low, which helps minimize power losses and improve efficiency in power management applications.
  7. Does the SI7392DP-T1-E3 have built-in protection features?

    • Yes, it has built-in ESD protection, making it robust and reliable in demanding environments.
  8. Is the SI7392DP-T1-E3 suitable for automotive applications?

    • Yes, it is AEC-Q101 qualified, making it suitable for automotive applications where reliability and performance are critical.
  9. What are the thermal characteristics of the SI7392DP-T1-E3?

    • The device has excellent thermal performance, with low thermal resistance and efficient heat dissipation capabilities.
  10. Where can I find detailed technical specifications and application notes for the SI7392DP-T1-E3?

    • Detailed technical specifications and application notes can be found in the product datasheet and application notes provided by the manufacturer.