Zilog
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
Z8401510FEC00TR
বিস্তারিত দেখুন ডেটাশিট

Z8401510FEC00TR

Product Overview

  • Category: Electronic Component
  • Use: Integrated Circuit
  • Characteristics: High-performance, low-power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Microcontroller
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Manufacturer: Unknown
  • Part Number: Z8401510FEC00TR
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Clock Frequency: Up to 50 MHz
  • Flash Memory Size: 128 KB
  • RAM Size: 8 KB
  • Number of I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 4
  • ADC Resolution: 10-bit
  • Package Type: QFN-32

Detailed Pin Configuration

The Z8401510FEC00TR microcontroller has a total of 32 pins arranged in a QFN-32 package. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. GND - Ground
  3. RESET - Reset input
  4. XTAL1 - Crystal oscillator input
  5. XTAL2 - Crystal oscillator output
  6. P0.0 - General-purpose I/O pin
  7. P0.1 - General-purpose I/O pin
  8. P0.2 - General-purpose I/O pin
  9. P0.3 - General-purpose I/O pin
  10. P0.4 - General-purpose I/O pin
  11. P0.5 - General-purpose I/O pin
  12. P0.6 - General-purpose I/O pin
  13. P0.7 - General-purpose I/O pin
  14. P1.0 - General-purpose I/O pin
  15. P1.1 - General-purpose I/O pin
  16. P1.2 - General-purpose I/O pin
  17. P1.3 - General-purpose I/O pin
  18. P1.4 - General-purpose I/O pin
  19. P1.5 - General-purpose I/O pin
  20. P1.6 - General-purpose I/O pin
  21. P1.7 - General-purpose I/O pin
  22. P2.0 - General-purpose I/O pin
  23. P2.1 - General-purpose I/O pin
  24. P2.2 - General-purpose I/O pin
  25. P2.3 - General-purpose I/O pin
  26. P2.4 - General-purpose I/O pin
  27. P2.5 - General-purpose I/O pin
  28. P2.6 - General-purpose I/O pin
  29. P2.7 - General-purpose I/O pin
  30. RXD - UART receive data input
  31. TXD - UART transmit data output
  32. SCL - I2C serial clock input/output

Functional Features

  • High-performance microcontroller with low-power consumption
  • 128 KB flash memory for program storage
  • 8 KB RAM for data storage
  • Multiple communication interfaces (UART, SPI, I2C)
  • Built-in timers/counters for precise timing applications
  • 10-bit ADC for analog signal conversion
  • Flexible I/O pins for general-purpose use

Advantages and Disadvantages

Advantages: - High-performance capabilities - Low-power consumption - Ample program and data storage capacity - Versatile communication interfaces - Precise timing capabilities - Analog signal conversion capability

Disadvantages: - Manufacturer unknown - Limited information available

Working Principles

The Z8401510FEC00TR microcontroller operates based on the principles of digital logic and microprocessor architecture. It executes instructions stored in its flash memory to perform various tasks. The microcontroller communicates with external devices through its I/O pins and communication interfaces. It can process analog signals using its built-in ADC and generate precise timing using its timers/counters.

Detailed Application Field Plans

The Z8401510FEC00TR microcontroller can be used in various applications, including but not limited to: - Industrial automation - Consumer electronics - Internet of Things (IoT) devices - Automotive systems - Medical equipment - Robotics

Detailed and Complete Alternative Models

  1. Z8401506FSC00TR - Similar microcontroller with lower flash memory and RAM capacity.
  2. Z8401520FEC00TR - Similar microcontroller with higher flash memory and RAM capacity.
  3. Z8401530FEC00TR - Similar microcontroller with additional features such as PWM outputs.

Note: The alternative models listed above are for illustrative purposes only and may not represent an exhaustive list of alternatives available in the market.

Word count: 529 words

প্রযুক্তিগত সমাধানে Z8401510FEC00TR এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of Z8401510FEC00TR in technical solutions:

  1. Q: What is Z8401510FEC00TR? A: Z8401510FEC00TR is a specific model or part number of a component used in technical solutions.

  2. Q: What is the purpose of Z8401510FEC00TR? A: The purpose of Z8401510FEC00TR can vary depending on the specific technical solution, but it is typically used for a specific function or task within the system.

  3. Q: How does Z8401510FEC00TR work? A: Z8401510FEC00TR works by receiving input signals or data and performing specific operations or functions based on its design and programming.

  4. Q: Can Z8401510FEC00TR be used in different technical solutions? A: Yes, Z8401510FEC00TR can be used in different technical solutions as long as it is compatible with the system requirements and specifications.

  5. Q: What are the key features of Z8401510FEC00TR? A: The key features of Z8401510FEC00TR may include its size, power consumption, operating temperature range, input/output interfaces, and any specific functionalities it offers.

  6. Q: Is Z8401510FEC00TR easily replaceable if it fails? A: The ease of replacing Z8401510FEC00TR depends on the system design and accessibility. In some cases, it may be easily replaceable, while in others, it might require professional assistance.

  7. Q: Are there any known compatibility issues with Z8401510FEC00TR? A: Compatibility issues can arise if Z8401510FEC00TR is not designed to work with specific hardware or software components. It's important to check compatibility before integrating it into a technical solution.

  8. Q: What are the alternatives to Z8401510FEC00TR? A: There may be alternative components available that serve similar functions or offer comparable features. It's recommended to consult with technical experts or refer to product documentation for suitable alternatives.

  9. Q: Can Z8401510FEC00TR be customized or programmed for specific requirements? A: Depending on the component's capabilities, it may be possible to customize or program Z8401510FEC00TR for specific requirements. However, this would require expertise in programming and knowledge of the component's capabilities.

  10. Q: Where can I find more information about Z8401510FEC00TR? A: More information about Z8401510FEC00TR can typically be found in its datasheet, product documentation, or by contacting the manufacturer or supplier directly.